Configuring Physical Interface Properties

The software driver for each network media type sets reasonable default values for general interface properties, such as the interface's maximum transmission unit (MTU) size, receive and transmit leaky bucket properties, link operational mode, and clock source. To modify any of the default general interface properties, include the appropriate statements at the [edit interfaces interface-name] hierarchy level:

interfaces {

    traceoptions { 

        file filename <files number> <size size> <(world-readable | no-world-readable)>;

        flag flag <disable>; 

    }

    interface-name {

        accounting-profile name;

        aggregated-ether-options {

            (flow-control | no-flow-control);

            lacp mode {

                periodic interval;

            }

            link-speed speed;

            (loopback | no-loopback);

            minimum-links number;

            source-address-filter {

                mac-address;

            }

            (source-filtering | no-source-filtering);

        }

        aggregated-sonet-options {

            link-speed speed;

            minimum-links number;

        }

        atm-options {

            cell-bundle-size cells;

            ilmi;

            linear-red-profiles profile-name {

                high-plp-max-threshold percent;

                low-plp-max-threshold percent;

                queue-depth cells high-plp-threshold percent low-plp-threshold percent;

            }

            mpls {

                pop-all-labels {

                    required-depth number;

                }

            }

            pic-type (atm1 | atm2);

            plp-to-clp;

            promiscuous-mode {

                vpi vpi-identifier;

            }

            scheduler-maps map-name {

                forwarding-class class-name {

                    epd-threshold cells plp1 cells;

                    linear-red-profile profile-name;

                    priority (high | low);

                    transmit-weight (cells number | percent number);

                }

                vc-cos-mode (alternate | strict);

            }

            vpi vpi-identifier {

                maximum-vcs maximum-vcs;

                oam-liveness {

                    up-count cells;

                    down-count cells;

                }

                oam-period (seconds | disable);

                shaping { 

                    (cbr rate | rtvbr peak rate sustained rate burst length | 

                                  vbr peak rate sustained rate burst length); 

                    queue-length number;

                } 

            }

        }

        clocking clock-source;

        dce;

        description text;

        dialer-options {

            pool pool-name priority number ;

            }

        }

        disable;

        ds0-options {

            bert-algorithm algorithm;

            bert-error-rate rate; 

            bert-period seconds; 

            byte-encoding (nx56 | nx64);

            fcs (16 | 32);

            idle-cycle-flag (flags | ones); 

            invert-data;

            loopback payload; 

            start-end-flag (filler | shared);

        }

        e1-options {

            bert-error-rate rate; 

            bert-period seconds; 

            fcs (16 | 32);

            framing (g704 | g704-no-crc4 | unframed);

            idle-cycle-flag (flags | ones); 

            invert-data;

            loopback (local | remote); 

            start-end-flag (filler | shared);

            timeslots time-slot-range;

        }

        e3-options {

            atm-encapsulation (direct | plcp);

            bert-algorithm algorithm; 

            bert-error-rate rate; 

            bert-period seconds; 

            buildout feet;

            compatibility-mode (digital-link | kentrox | larscom) <subrate value>; 

            fcs (16 | 32);

            framing (g.751 | g.832);

            idle-cycle-flag (filler | shared); 

            loopback (local | remote); 

            (payload-scrambler | no-payload-scrambler); 

            start-end-flag value; 

            (unframed | no-unframed);

        }

        encapsulation type;

        es-options {

            backup-interface es-fpc/pic/port;

        }

        fastether-options {

            802.3ad aex;

            (flow-control | no-flow-control);

            ingress-rate-limit rate;

            (loopback | no-loopback);

            source-address-filter {

                mac-address;

            }

            (source-filtering | no-source-filtering);

        }

        gigether-options {

            802.3ad aex;

            (flow-control | no-flow-control);

            (loopback | no-loopback);

            source-address-filter {

                mac-address;

            }

            (source-filtering | no-source-filtering);

            ethernet-switch-profile {

                (mac-learn-enable | no-mac-learn-enable);

                tag-protocol-id [ tpids ];

                ethernet-policer-profile {

                    input-priority-map {

                        ieee802.1p premium [ values ];

                    }

                    output-priority-map {

                        classifier { 

                            premium { 

                                forwarding-class class-name {

                                     loss-priority (high | low);

                                }

                            }

                        }

                    }

                    policer cos-policer-name {

                        aggregate {

                            bandwidth-limit bps;

                            burst-size-limit bytes;

                        }

                        premium {

                            bandwidth-limit bps;

                            burst-size-limit bytes;

                        }

                    }

                }

            }

        }

        (gratuitous-arp-reply | no-gratuitous-arp-reply);

        hold-time up milliseconds down milliseconds;

        isdn-options {

            calling-number number;

            spid1 spid-string;

            spid2 spid-string;

            static-tei-val value;

            switch-type (att5e | etsi | ni1 | ntdms100 | ntt); 

            t310 seconds;

            tei-option (first-call | power-up);

        }

        keepalives <down-count number> <interval seconds> <up-count number>;

        link-mode mode;

        lmi {

            lmi-type (ansi | itu);

            n391dte number;

            n392dce number;

            n392dte number;

            n393dce number;

            n393dte number;

            t391dte seconds;

            t392dce seconds;

        }

        mac mac-address;

        mlfr-uni-nni-bundle-options {

            acknowledge-retries number;

            acknowledge-timer milliseconds;

            action-red-differential-delay (disable-tx | remove-link);

            cisco-interoperability send-lip-remove-link-for-link-reject;

            drop-timeout milliseconds;

            fragment-threshold bytes;

            hello-timer milliseconds;

            link-layer-overhead percent;

            lmi-type (ansi | itu);

            minimum-links number;

            mrru bytes;

            n391 number;

            n392 number;

            n393 number;

            red-differential-delay milliseconds;

            t391 seconds;

            t392 seconds;

            yellow-differential-delay milliseconds;

        }

        mtu bytes;

        multiservice-options {

            boot-command filename;

            (core-dump | no-core-dump);

            (syslog | no-syslog);

        }

        no-gratuitous-arp-request;

        no-keepalives;

        no-partition {

            interface-type type;

        }

        optics-options {

            wavelength nm;

    )

        partition partition-number oc-slice oc-slice-range interface-type type {

            timeslots time-slot-range;

        }

        passive-monitor-mode;

        per-unit-scheduler;

        ppp-options {

            chap {

                access-profile name;

                local-name name;

                passive;

            }

            compression {

                acfc;

                pfc;

            }

        }

        receive-bucket {

            overflow (discard | tag);

            rate percentage;

            threshold bytes;

        }

        redundancy-options {

            primary sp-fpc/pic/port;

            secondary sp-fpc/pic/port;

        }

        serial-options { 

            clock-rate rate;

            clocking-mode (dce | dte | loop);

            control-leads {

                control-signal (assert | de-assert | normal);

                cts (ignore | normal | require);

                dcd (ignore | normal | require);

                dsr (ignore | normal | require);

                dtr signal-handling-option;

                ignore-all;

                indication (ignore | normal | require);

                rts (assert | de-assert | normal);

                tm (ignore | normal | require);

            }

            control-polarity (negative | positive);

            cts-polarity (negative | positive);

            dcd-polarity (negative | positive);

            dsr-polarity (negative | positive);

            dtr-circuit (balanced | unbalanced);

            dtr-polarity (negative | positive);

            encoding (nrz | nrzi);

            indication-polarity (negative | positive);

            line-protocol protocol;

            loopback mode;

            rts-polarity (negative | positive);

            tm-polarity (negative | positive);

            transmit-clock invert;

        }

        services-options {

            inactivity-timeout seconds;

            open-timeout seconds;

            syslog {

                host hostname {

                    facility-override facility-name;

                    log-prefix prefix-number;

                    services priority-level;

                }

            }

        }

        shdsl-options {

            annex (annex-a | annex-b);

            line-rate line-rate;

            loopback (local | payload | remote);

            snr-margin {

                current margin;

                snext margin;

            }

        }

        sonet-options {

            aggregate asx;

            aps {

                advertise-interval milliseconds;

                authentication-key key;

                force;

                hold-time milliseconds;

                lockout;

                neighbor address;

                paired-group group-name;

                protect-circuit group-name;

                request;

                revert-time seconds;

                switching-mode (bidirectional | unidirectional);

                working-circuit group-name;

            }

            bytes {

                c2 value;

                e1-quiet value;

                f1 value;

                f2 value;

                s1 value;

                z3 value;

                z4 value;

            }

            fcs (16 | 32);

            loopback (local | remote); 

            mpls {

                pop-all-labels {

                    required-depth number;

                }

            }

            path-trace trace-string;

            (payload-scrambler | no-payload-scrambler);

            rfc-2615; 

            trigger {

                defect ignore {

                    hold-time up milliseconds down milliseconds;

                }

            }

            vtmapping (itu-t | klm);

            (z0-increment | no-z0-increment);

        }

        speed (10m | 100m);

        stacked-vlan-tagging;

        t1-options {

            bert-algorithm algorithm; 

            bert-error-rate rate; 

            bert-period seconds; 

            buildout value;

            byte-encoding (nx56 | nx64);

            fcs (16 | 32);

            framing (esf | sf);

            idle-cycle-flag (flags | ones); 

            invert-data;

            line-encoding (ami | b8zs);

            loopback (local | payload | remote); 

            remote-loopback-respond;

            start-end-flag (filler | shared); 

            timeslots time-slot-range;

        }

        t3-options {

            atm-encapsulation (direct | plcp);

            bert-algorithm algorithm; 

            bert-error-rate rate; 

            bert-period seconds; 

            buildout feet;

            (cbit-parity | no-cbit-parity); 

            compatibility-mode (adtran | digital-link | kentrox | larscom | verilink) 

                     <subrate value>; 

            fcs (16 | 32);

            (feac-loop-respond | no-feac-loop-respond);

            idle-cycle-flag value; 

            (long-buildout | no-long-buildout);

            (loop-timing | no-loop-timing);

            loopback (local | payload | remote); 

            (mac | no-mac);

            (payload-scrambler | no-payload-scrambler); 

            start-end-flag (filler | shared); 

        }

        traceoptions {

            flag flag <flag-modifier> <disable>;

        }

        transmit-bucket {

            overflow discard;

            rate percentage;

            threshold bytes;

        }

        (traps | no-traps); 

        unit {

            logical-interface-statements;

            }

        }

        vlan-tagging;

    }

}

This chapter discusses configuration of the following physical interface properties:

• Specifying an Aggregated Interface
• Adding an Interface Description to the Configuration
• Configuring the Link Characteristics
• Configuring the Media MTU
• Configuring Interface Encapsulation
• Configuring the PPP Challenge Handshake Authentication Protocol
• Monitoring a PPP Session
• Tracing Operations of the PPPD Process
• Configuring PPP Address and Control Field Compression
• Configuring the PPP Protocol Field Compression
• Configuring the Interface Speed
• Configuring Keepalives
• Configuring the Clock Source
• Configuring the Router as a DCE
• Configuring Receive and Transmit Leaky Bucket Properties
• Configuring Accounting for the Physical Interface
• Interface Diagnostics
• Tracing Operations of an Individual Router Interface
• Damping Interface Transitions
• Configuring Multiservice Physical Interface Properties
• Enabling or Disabling SNMP Notifications on Physical Interfaces
• Disabling a Physical Interface

For information about interface-specific physical properties, see Interface Types.

Table 8 lists statements that you can use to configure physical interfaces.

Table 8: Statements for Physical Interface Properties

Statement	Interface Types	Usage Guidelines
802.3ad aex	Aggregated Ethernet interfaces	Configuring Ethernet Link Aggregation or Configuring Aggregated Ethernet Interfaces
access-profile name	Interfaces with Point-to-Point Protocol (PPP) encapsulation	Configuring the PPP Challenge Handshake Authentication Protocol
accounting-profile name	All	Configuring Accounting for the Physical Interface
acfc	Interfaces with PPP encapsulation	Configuring a PPPoE Interface
acknowledge-retries number	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
acknowledge-timer milliseconds	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
action-red-differential-delay (disable-tx | remove-link)	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
advertise-interval milliseconds	SONET/SDH interfaces	Configuring APS and MSP
aggregate	Gigabit Ethernet intelligent queuing (IQ) interfaces and Gigabit Ethernet interfaces with small form-factor pluggable transceivers (SFPs) (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring Gigabit Ethernet Policers
aggregate asx	Aggregated SONET/SDH interfaces	Configuring Aggregated SONET/SDH Interfaces
aggregated-ether-options	Aggregated Ethernet interfaces	Configuring Aggregated Ethernet Interfaces
aggregated-sonet-options	Aggregated SONET/SDH interfaces	Configuring Aggregated SONET/SDH Interfaces
annex (annex-a | annex-b}	ATM interfaces on J-series Services Routers	Configuring SHDSL Operating Mode on an ATM Physical Interface
aps	SONET/SDH interfaces	Configuring APS and MSP
atm-encapsulation (direct | plcp)	E3 and T3 traffic over Asynchronous Transfer Mode (ATM) interfaces	Configuring E3 and T3 Parameters on ATM Interfaces
atm-options	ATM1 and ATM2 IQ interfaces	Configuring ATM Interfaces
authentication-key key	SONET/SDH interfaces	Configuring APS and MSP
backup-interface	E1, E3, T1, T3 and Fast Ethernet	Configuring an ISDN Dialer Interface as a Backup Interface
bandwidth-limit bps	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring Gigabit Ethernet Policers
bert-algorithm algorithm	E3, T1, T3, multichannel DS3, channelized interfaces (DS3, OC12, and STM1), and channelized IQ interfaces (E1 and DS3)	Interface Diagnostics
bert-error-rate rate	E1, E3, T1, T3, and channelized interfaces (DS3, OC3, OC12, and STM1)	Interface Diagnostics
bert-period seconds	E1, E3, T1, T3, and channelized interfaces (DS3, OC12, and STM1)	Interface Diagnostics
boot-command filename	Adaptive services, monitoring services, and collector interfaces	Configuring Multiservice Physical Interface Properties
boot-command length	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring Gigabit Ethernet Policers
buildout value	T1 interfaces	Configuring the T1 Buildout
buildout feet	E3 and T3 traffic over ATM interfaces	Configuring E3 and T3 Parameters on ATM Interfaces
burst-size-limit bytes	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring Gigabit Ethernet Policers
byte-encoding (nx56 | nx64)	DS0 and T1 interfaces	Configuring T1 Byte Encoding
bytes [ values ]	SONET/SDH interfaces	Configuring SONET/SDH Header Byte Values
(cbit-parity | no-cbit-parity)	T3 interfaces	Disabling T3 C-Bit Parity Mode
cbr rate	ATM interfaces	Defining the ATM Traffic-Shaping Profile
cell-bundle-size cells	ATM2 IQ interfaces using ATM Layer 2 circuit cell-relay transport mode	Configuring the Layer 2 Circuit Cell-Relay Cell Maximum
chap	Interfaces with PPP encapsulation	Configuring the PPP Challenge Handshake Authentication Protocol
cisco-interoperability send-lip-remove-link-for-link-reject	link services IQ (lsq) interfaces	JUNOS Services Interfaces Configuration Guide
classifier	Gigabit Ethernet IQ interfaces	Specifying an Output Priority Map
clocking clock-source	ATM, DS0, E1, E3, SONET/SDH, T1, and T3 interfaces	Configuring the Clock Source
clocking-mode (dce | dte | loop)	Serial interfaces (EIA-530 and V.35)	Configuring the Serial Clocking Mode
clock-rate rate	Serial interfaces (EIA-530 and V.35)	Configuring the DTE Clock Rate
compatibility-mode mode	E3 and T3 interfaces	Configuring the E3 CSU Compatibility Mode and Configuring the T3 CSU Compatibility Mode
compression	Interfaces with PPP encapsulation.	JUNOS Class of Service Configuration Guide
control-leads	Serial interfaces (EIA-530, V.35, and X.21)	Configuring the Serial Signal Handling
control-polarity (negative | positive)	Serial interfaces (X.21)	Configuring Serial Signal Polarities
control-signal (assert | de-assert | normal)	Serial interfaces (X.21)	Configuring the Serial Signal Handling
(core-dump | no-core-dump)	Adaptive services, monitoring services, and collector interfaces	Configuring Multiservice Physical Interface Properties
cts (ignore | normal | require)	Serial interfaces (EIA-530 and V.35)	Configuring the Serial Signal Handling
cts-polarity (negative | positive)	Serial interfaces (EIA-530 and V.35)	Configuring Serial Signal Polarities
current margin	ATM interfaces on J-series Services Routers	Configuring SHDSL Operating Mode on an ATM Physical Interface
dcd (ignore | normal | require)	Serial interfaces (EIA-530 and V.35)	Configuring the Serial Signal Handling
dcd-polarity (negative | positive)	Serial interfaces (EIA-530 and V.35)	Configuring Serial Signal Polarities
dce	Interfaces with Frame Relay encapsulation	Configuring the Router as a DCE
description text	All	Adding an Interface Description to the Configuration
dialer-options	ISDN interfaces	Configuring ISDN Physical Interface Properties
disable	All	Disabling a Physical Interface, Tracing Operations of an Individual Router Interface, and Tracing Operations of an Individual Router Interface
down-count	ATM interfaces	Configuring ATM Interfaces
drop-timeout milliseconds	Multilink, link services, and voice services interfaces	JUNOS Services Interfaces Configuration Guide
ds0-options	DS0 interfaces	Channelized Interfaces Overview
dsr (ignore | normal | require)	Serial interfaces (EIA-530 and V.35)	Configuring the Serial Signal Handling
dsr-polarity (negative | positive)	Serial interfaces (EIA-530 and V.35)	Configuring Serial Signal Polarities
dtr signal-handling-option	Serial interfaces (EIA-530 and V.35)	Configuring the Serial Signal Handling
dtr-circuit (balanced | unbalanced)	Serial interfaces (EIA-530 and V.35)	Configuring the Serial DTR Circuit
dtr-polarity (negative | positive)	Serial interfaces (EIA-530 and V.35)	Configuring Serial Signal Polarities
e1-options	E1 interfaces	Configuring E1 Interfaces
e3-options	E3 interfaces	Configuring E3 Interfaces
encapsulation type	All interfaces, except loopback and multicast tunnel	Configuring Interface Encapsulation
encoding (nrz | nrzi)	Serial interfaces (EIA-530, V.35, and X.21)	Configuring Serial Line Encoding
epd-threshold cells	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
es-options	ES interfaces	JUNOS Services Interfaces Configuration Guide
ethernet-policer-profile	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring Gigabit Ethernet Policers
ethernet-switch-profile	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring Gigabit Ethernet Policers, Configuring MAC Address Filtering, and Configuring the Management Ethernet Interface
facility-override facility-name	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
fastether-options	Fast Ethernet interfaces	Configuring Ethernet Physical Interface Properties
fcs (16 | 32	E1/E3, SONET/SDH, and T1/T3 interfaces	Configuring the E1 Frame Checksum, Configuring the E3 Frame Checksum, Configuring the SONET/SDH Frame Checksum, Configuring the T1 Frame Checksum, and Configuring the T3 Frame Checksum
(feac-loop-respond | no-feac-loop-respond)	T3 interfaces	Configuring the T3 FEAC Response
(flow-control | no-flow-control)	Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces	Configuring Flow Control
force	SONET/SDH interfaces	Configuring APS and MSP
forwarding-class class-name	Gigabit Ethernet IQ and ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components and Specifying an Output Priority Map
fragment-threshold bytes	Multilink, link services, and voice services interfaces	JUNOS Services Interfaces Configuration Guide
framing framing-type	E1, E3, and T1 interfaces	Configuring E3 and T3 Parameters on ATM Interfaces, Configuring E1 Framing, and Configuring T1 Framing
gigether-options	Gigabit Ethernet interfaces	Configuring Ethernet Physical Interface Properties
(gratuitous-arp-reply | no-gratuitous-arp-reply)	Ethernet interfaces	Configuring Gratuitous ARP
hello-timer milliseconds	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
high-plp-max-threshold	ATM2 interfaces	Configuring Linear RED Profiles
high-plp-threshold percent	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
hold-time milliseconds	SONET/SDH interfaces	Configuring APS and MSP
hold-time up milliseconds down milliseconds	All interfaces, except aggregated SONET/SDH, generalized routing encapsulation (GRE) tunnel, and IP tunnel	Damping Interface Transitions and Configuring SONET/SDH Defect Triggers to Be Ignored
host hostname	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
ieee802.1p premium [ values ]	Gigabit Ethernet IQ interfaces	Specifying an Input Priority Map
idle-cycle-flag value	E1, E3, T1, and T3 interfaces	Configuring the E1 Idle Cycle Flag, Configuring the E3 Idle Cycle Flag, Configuring the T1 Idle Cycle Flag, and Configuring the T3 Idle Cycle Flag
ignore-all	Serial interfaces (EIA-530, V.35, and X.21)	Configuring the Serial Signal Handling
ilmi	ATM interfaces	Configuring Communication with Directly Attached ATM Switches and Routers
inactivity-timeout seconds	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
indication (ignore | normal | require)	Serial interfaces (X.21)	Configuring the Serial Signal Handling
indication-polarity (negative | positive)	Serial interfaces (X.21)	Configuring Serial Signal Polarities
ingress-rate-limit rate	8-port, 12-port, and 48-port Fast Ethernet interfaces	Configuring the Ingress Rate Limit
input-priority-map	Gigabit Ethernet IQ interfaces	Specifying an Input Priority Map
interface-type type	Channelized IQ interfaces ISDN interfaces	Channelized Interfaces Overview Configuring ISDN Physical Interface Properties
invert-data	DS0, E1, and T1 interfaces	Configuring E1 Data Inversion and Configuring T1 Data Inversion
isdn-options	ISDN interfaces	Configuring ISDN Logical Interface Properties
keepalives <down-count number> <interval seconds> <up-count number>	Aggregated SONET/SDH, DS0, E1, E3, SONET/SDH, T1, and T3 interfaces	Configuring Keepalives
lacp mode	Aggregated Ethernet interfaces	Configuring Aggregated Ethernet LACP
line-encoding (ami | b8zs)	T1 interfaces	Configuring T1 Line Encoding
line-protocol protocol	Serial interfaces (EIA-530, V.35, and X.21)	Configuring the Serial Line Protocol
line-rate line-rate	ATM interfaces on J-series Services Routers	Configuring SHDSL Operating Mode on an ATM Physical Interface
linear-red-profile profile-name	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
linear-red-profiles profile-name	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
link-layer-overhead percent	AS PIC link services IQ interfaces (lsq)	JUNOS Services Interfaces Configuration Guide
link-mode mode	Management Ethernet (fxp0) and Fast Ethernet interfaces	Configuring the Link Characteristics
link-speed speed	Aggregated Ethernet and aggregated SONET/SDH interfaces	Configuring Aggregated Ethernet Link Speed and Configuring Aggregated SONET/SDH Link Speed
lmi lmi-options	Interfaces with Frame Relay encapsulation	Configuring Tunable Keepalives for Frame Relay LMI and JUNOS Services Interfaces Configuration Guide
lmi-type (ansi | itu)	Link services interfaces and interfaces with Frame Relay encapsulation	Configuring Frame Relay Keepalives
local-name name	Interfaces with PPP encapsulation	Configuring the PPP Challenge Handshake Authentication Protocol
lockout	SONET/SDH interfaces	Configuring APS and MSP
log-prefix prefix-number	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
(long-buildout | no-long-buildout)	T3 interfaces	Configuring the T3 Line Buildout
(loop-timing | no-loop-timing)	Channelized IQ interfaces	Configuring the Channelized T3 Loop Timing
loopback mode	DS0, E1, E3, T1, T3, Ethernet, SONET/SDH, ATM interfaces on J-series Services Routers, and serial interfaces (EIA-530, V.35, and X.21)	Configuring E1 Loopback Capability, Configuring E3 Loopback Capability, Configuring Ethernet Loopback Capability, Configuring Serial Loopback Capability, Configuring Channelized IQ SONET/SDH Loop Timing, Configuring T1 Loopback Capability, Configuring T3 Loopback Capability, and Configuring SHDSL Operating Mode on an ATM Physical Interface
(loopback | no-loopback)	Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces	Configuring Ethernet Loopback Capability
loss-priority (high | low)	Gigabit Ethernet IQ interfaces	Specifying an Output Priority Map
low-plp-max-threshold percent	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
low-plp-threshold percent	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
lsq-failure-options	link services IQ (lsq) interfaces	JUNOS Services Interfaces Configuration Guide
mac mac-address	Management Ethernet interface (fxp0)	Configuring the MAC Address on the Management Ethernet Interface
(mac-learn-enable | no-mac-learn-enable)	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring MAC Address Filtering
maximum-vcs maximum-vcs	ATM interfaces	Configuring the Maximum Number of ATM1 VCs on a VP
minimum-links number	Multilink, link services, and voice services interfaces	JUNOS Services Interfaces Configuration Guide
mlfr-uni-nni-bundle-options bundle-options	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
mpls	ATM and SONET/SDH interfaces in passive monitoring mode	Removing MPLS Labels from Incoming Packets and "Removing MPLS Labels from Incoming Packets"
mrru bytes	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
mtu bytes	All interfaces, except management Ethernet (fxp0), loopback, multilink, and multicast tunnel	Configuring the Media MTU
multiservice-options	Adaptive services, monitoring services, and collector interfaces	Configuring Multiservice Physical Interface Properties
n391 number	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
n392 number	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
n393 number	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
neighbor address	SONET/SDH interfaces	Configuring APS and MSP
no-gratuitous-arp-request	Ethernet interfaces	Configuring Gratuitous ARP
no-keepalives	Interfaces with PPP, Frame Relay, or Cisco High-level Data Link Control (HDLC) encapsulation	Configuring Keepalives
no-partition	Channelized IQ interfaces	Channelized Interfaces Overview
no-termination-request	link services IQ (lsq) interfaces	JUNOS Services Interfaces Configuration Guide
oam-liveness	ATM interfaces	Configuring the OAM F4 Cell Flows
oam-period (seconds | disable)	ATM interfaces	Configuring the OAM F4 Cell Flows
oc-slice oc-slice-range	Channelized OC12 IQ interfaces	Configuring Channelized OC12 Interfaces
open-timeout seconds	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
optics-options	Gigabit Ethernet dense wavelength-division multiplexing (DWDM) interfaces	Configuring the 10-Gigabit Ethernet DWDM Interface Wavelength
output-priority-map	Gigabit Ethernet IQ interfaces	Specifying an Output Priority Map
overflow (discard | tag)	All interfaces, except ATM, channelized E1, E1, Fast Ethernet, Gigabit Ethernet, and channelized IQ	Configuring Receive and Transmit Leaky Bucket Properties and "Configuring Receive and Transmit Leaky Bucket Properties"
paired-group group-name	SONET/SDH interfaces	Configuring APS and MSP
partition partition-number	Channelized IQ interfaces	Channelized Interfaces Overview
passive	Interfaces with PPP encapsulation	Configuring the PPP Challenge Handshake Authentication Protocol
passive-monitor-mode	SONET/SDH interfaces	Enabling Passive Monitoring on SONET/SDH Interfaces
path-trace trace-string	SONET/SDH interfaces	Configuring the SONET/SDH Path Trace Identifier
(payload-scrambler | no-payload-scrambler)	E3, SONET/SDH, and T3 interfaces	Configuring E3 and T3 Parameters on ATM Interfaces, Configuring E3 HDLC Payload Scrambling, Configuring SONET/SDH HDLC Payload Scrambling, Configuring T3 HDLC Payload Scrambling, and Examples: Configuring T3 Interfaces
periodic interval	Aggregated Ethernet interfaces	Configuring Aggregated Ethernet LACP
per-unit-scheduler	IQ interfaces	JUNOS Class of Service Configuration Guide
pfc	Interfaces with PPP encapsulation
pic-type (atm1 | atm2)	ATM2 IQ interfaces	Configuring the ATM PIC Type
plp1 cells	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
plp-to-clp	ATM2 IQ interfaces	Enabling the PLP Setting to Be Copied to the CLP Bit
policer cos-policer-name	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring Gigabit Ethernet Policers
pop-all-labels	ATM and SONET/SDH interfaces in passive monitoring mode	Removing MPLS Labels from Incoming Packets and "Removing MPLS Labels from Incoming Packets"
ppp-options	Interfaces with PPP encapsulation	Configuring the PPP Challenge Handshake Authentication Protocol
premium	Gigabit Ethernet IQ interfaces	Configuring Gigabit Ethernet Policers and Specifying an Output Priority Map
primary sp-fpc/pic/port	Redundant interfaces for adaptive services interfaces (rsp-)	JUNOS Services Interfaces Configuration Guide
priority (high | low)	ATM2 IQ interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
priority number	ISDN interfaces	Configuring an ISDN Dialer Interface as a Backup Interface
promiscuous-mode	ATM2 IQ interfaces	Configuring ATM Cell-Relay Promiscuous Mode
protect-circuit group-name	SONET/SDH interfaces	Configuring APS and MSP
queue-depth cells	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
queue-length number	ATM1 interfaces	Configuring the ATM1 Queue Length
rate percentage	All interfaces, except ATM, channelized E1, E1, Fast Ethernet, Gigabit Ethernet, and channelized IQ	Configuring Receive and Transmit Leaky Bucket Properties and "Configuring Receive and Transmit Leaky Bucket Properties"
receive-bucket	All interfaces, except ATM, Fast Ethernet, and Gigabit Ethernet	Configuring Receive and Transmit Leaky Bucket Properties
red-differential-delay milliseconds	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
redundancy-options	Redundant interfaces for adaptive services interfaces (rsp-)	JUNOS Services Interfaces Configuration Guide
remote-loopback-respond	T1 interfaces	Configuring the T1 Remote Loopback Response
request	SONET/SDH interfaces	Configuring APS and MSP
required-depth number	ATM and SONET/SDH interfaces in passive monitoring mode	Removing MPLS Labels from Incoming Packets and "Removing MPLS Labels from Incoming Packets"
revert-time seconds	SONET/SDH interfaces	Configuring APS and MSP
rfc-2615	SONET/SDH interfaces	Configuring SONET/SDH RFC 2615 Support
rts (assert | de-assert | normal)	Serial interfaces (EIA-530 and V.35)	Configuring the Serial Signal Handling
rts-polarity (negative | positive)	Serial interfaces (EIA-530 and V.35)	Configuring Serial Signal Polarities
rtvbr peak rate sustained rate burst length	ATM interfaces	Configuring ATM2 IQ Real-Time VBR
scheduler-maps map-name	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
secondary sp-fpc/pic/port	Redundant interfaces for adaptive services interfaces (rsp-)	JUNOS Services Interfaces Configuration Guide
services-options	Services interfaces	JUNOS Services Interfaces Configuration Guide
serial-options	Serial interfaces (EIA-530, V.35, and X.21)	Configuring Serial Interfaces
services priority-level	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
shdsl-options	ATM interfaces on J-series Services Routers	Configuring SHDSL Operating Mode on an ATM Physical Interface
size	All	Tracing Operations of the Interface Process
shaping	ATM interfaces	Defining the ATM Traffic-Shaping Profile
snext margin	ATM interfaces on J-series Services Routers	Configuring SHDSL Operating Mode on an ATM Physical Interface
snr-margin	ATM interfaces on J-series Services Routers	Configuring SHDSL Operating Mode on an ATM Physical Interface
sonet-options	SONET/SDH interfaces	Configuring SONET/SDH Physical Interface Properties
source-address-filter mac-address	Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces	Enabling Ethernet MAC Address Filtering
(source-filtering | no-source-filtering)	Aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, Gigabit Ethernet IQ, and Gigabit Ethernet interfaces with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Enabling Ethernet MAC Address Filtering
speed (10m | 100m)	Management Ethernet interface (fxp0) and 12-port and 48-port Fast Ethernet interfaces	Configuring the Interface Speed
spid1 spid2	ISDN interfaces	Configuring ISDN Physical Interface Properties Configuring an ISDN Dialer Interface as a Backup Interface
stacked-vlan-tagging	Gigabit Ethernet IQ interfaces	Configuring the Management Ethernet Interface
start-end-flag (filler | shared)	DS0, E1, E3, T1, and T3 interfaces	Configuring E1 Start End Flags, Configuring the E3 Start End Flags, Configuring T1 Start End Flags, and Configuring the T3 Start End Flags
switching-mode (bidirectional | unidirectional)	Unchannelized OC3, OC12, and OC48 SONET/SDH interfaces on T-series platforms	Configuring Switching Between the Working and Protect Circuits
syslog	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
(syslog | no-syslog)	Adaptive services, monitoring services, and collector interfaces	Configuring Multiservice Physical Interface Properties
t1-options	T1 interfaces	Configuring T1 Interfaces
t3-options	T3 interfaces	Configuring T3 Interfaces
tag-protocol-id	ISDN interfaces	Configuring ISDN Physical Interface Properties
t310	ISDN interfaces	Configuring ISDN Physical Interface Properties
t391 seconds	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
t392 number	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
tag-protocol-id [ tpids ]	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring the Management Ethernet Interface
tag-protocol-id (first-call | power-up)	ISDN interfaces	Configuring ISDN Physical Interface Properties
threshold bytes	All interfaces, except ATM, channelized E1, E1, Fast Ethernet, Gigabit Ethernet, and channelized IQ	Configuring Receive and Transmit Leaky Bucket Properties and "Configuring Receive and Transmit Leaky Bucket Properties"
timeslots time-slot-range	Channelized T1 IQ and channelized E1 IQ interfaces	Channelized Interfaces Overview
tm (ignore | normal | require)	Serial interfaces (EIA-530)	Configuring the Serial Signal Handling
tm-polarity (negative | positive)	Serial interfaces (EIA-530)	Configuring Serial Signal Polarities
traceoptions	All	Tracing Operations of an Individual Router Interface and Tracing Operations of the Interface Process
transmit-bucket	All interfaces, except ATM, Fast Ethernet, and Gigabit Ethernet	Configuring Receive and Transmit Leaky Bucket Properties
transmit-clock invert	Serial interfaces (EIA-530, V.35, and X.21)	Configuring the Serial Clocking Mode
transmit-weight (cells number | percent number)	ATM2 IQ interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
(traps | no-traps)	All	Enabling or Disabling SNMP Notifications on Physical Interfaces
trigger defect ignore	ATM over SONET/SDH and SONET/SDH interfaces	Configuring SONET/SDH Defect Triggers to Be Ignored
(unframed | no-unframed)	E3 IQ interfaces	Configuring E3 IQ Unframed Mode
vbr peak rate sustained rate burst length	ATM interfaces	Defining the ATM Traffic-Shaping Profile
vc-cos-mode (alternate | strict)	ATM2 interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
vpi vpi-identifier	ATM interfaces	Configuring ATM Cell-Relay Promiscuous Mode and Configuring the Maximum Number of ATM1 VCs on a VP
vlan-tagging	Fast Ethernet and Gigabit Ethernet interfaces	Configuring 802.1Q VLANs
vtmapping	Channelized STM1 interfaces	Configuring Virtual Tributary Mapping of Channelized STM1 Interfaces
wavelength nm	Gigabit Ethernet dense wavelength-division multiplexing (DWDM) interfaces	Configuring the 10-Gigabit Ethernet DWDM Interface Wavelength
working-circuit group-name	SONET/SDH interfaces	Configuring APS and MSP
yellow-differential-delay milliseconds	Link services and voice services interfaces	JUNOS Services Interfaces Configuration Guide
(z0-increment | no-z0-increment)	SONET/SDH interfaces	Configuring an Incrementing STM ID