Other Miscellaneous Commands
There are a variety of other useful commands you can use when maintaining a routing matrix.
- To display the location of routing matrix components and convert FPCs from T640 routing node local numbering to routing matrix global numbering, issue the
show chassis location fpccommand on the TX Matrix platform:user@router>show chassis location fpcGlobal FPC LCC Local FPC1 0 12 0 23 0 316 2 017 2 119 2 3To check the status of the SIB connection between the TX Matrix platform and T640 routing nodes, issue the show chassis fabric topologycommand on the TX Matrix platform. All values for each available T640 routing node (LCC) should be in theUPstate. In the following excerpt of output for this command, a routing matrix that contains only LCCs0and2shows only these two T640 routing nodes as beingUP:LCC0_SIB-L0_F0,03->SIB-S0_F0,00 UPLCC1_SIB-L0_F0,03->SIB-S0_F0,01 RESETLCC2_SIB-L0_F0,03->SIB-S0_F0,02 UPLCC3_SIB-L0_F0,03->SIB-S0_F0,03 RESETTo verify that the Ethernet links between the TX Matrix platform and the T640 routing node control boards are operational, issue the show chassis ethernet-switchcommand on the TX Matrix platform:user@router>show chassis ethernet-switchscc-re0:--------------------------------------------------------------------------Link is good on FE port 4 connected to device: LCC0Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 6 connected to device: LCC2Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 8 connected to device: SPMBSpeed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on GE port 13 connected to device: Other RESpeed is 1000MbDuplex is fullAutonegotiate is Enabledlcc0-re0:--------------------------------------------------------------------------Link is good on FE port 1 connected to device: FPC1Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 2 connected to device: FPC2Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 3 connected to device: FPC3Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 8 connected to device: SPMBSpeed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 10 connected to device: SCCSpeed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on GE port 13 connected to device: Other RESpeed is 100MbDuplex is fullAutonegotiate is Enabledlcc2-re0:--------------------------------------------------------------------------Link is good on FE port 0 connected to device: FPC0Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 1 connected to device: FPC1Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 3 connected to device: FPC3Speed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 8 connected to device: SPMBSpeed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on FE port 10 connected to device: SCCSpeed is 100MbDuplex is fullAutonegotiate is EnabledLink is good on GE port 13 connected to device: Other RESpeed is 100MbDuplex is fullAutonegotiate is Enabled