Displaying Routes

When you need to verify route information for a routing matrix, you must issue operational commands on the TX Matrix platform. To display available routes for the routing matrix, issue a show route command:

user@router> show route summary

Router ID: 10.255.77.158

inet.0: 13 destinations, 14 routes (12 active, 0 holddown, 1 hidden)

              Direct:      4 routes,      3 active

               Local:      2 routes,      2 active

              Static:      6 routes,      6 active

               IS-IS:      2 routes,      1 active

inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)

                 LDP:      1 routes,      1 active

iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)

              Direct:      1 routes,      1 active

mpls.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden)

                MPLS:      3 routes,      3 active

                 LDP:      2 routes,      2 active

               L2CKT:      2 routes,      2 active

inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)

              Direct:      2 routes,      2 active

__juniper_private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 
hidden)

              Direct:      1 routes,      1 active

l2circuit.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden)

                 LDP:      1 routes,      1 active

               L2CKT:      4 routes,      4 active