Configuring System Alarms to Show Automatically

You can configure J-series Services Routers to execute a show system alarms command whenever a user with the login class admin logs on to the router. To do so, include the login-alarms statement at the [edit system login class admin] hierarchy level:

[edit system login class admin]

    login-alarms;

Table 32 describes system alarms that may occur. These alarms are preset and cannot be modified.

Table 32: System Alarms

Alarm Type	Alarm summary	Remedy
Configuration	This alarm appears if you have not created a rescue configuration for the router. If you inadvertently commit a configuration that denies management access to the router, you must either connect a console to the router or invoke a rescue configuration. Using a rescue configuration is the recommended method. A rescue configuration is one that you know allows management access to the router.	Set the rescue configuration. For more information on setting the rescue configuration, see Creating and Returning to a Rescue Configuration.
License	This alarm appears if you have configured at least one software feature that requires a feature license, but no valid license for the feature is currently installed.	Install a valid license key.

For more information on system alarms for J-series Services Routers, see the J-series Services Router Administration Guide. For more information on the show system alarms command, see the JUNOS System Basics and Services Command Reference.