Index
A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
Symbols
- !
- regular expression operator 1, 2, 3
- system logging 1
- wildcard character 1
- " ", configuration group wildcards 1
- #
- comment character
- in commands 1
- in configuration statements 1
- configuration mode prompt 1
- $
- regular expression operator 1, 2, 3
- system logging 1
- ( )
- regular expression operator 1, 2, 3, 4
- *
- regular expression operator 1
- system logging 1
- wildcard character 1
- +
- in statement lists 1
- regular expression operator 1
- system logging 1
- .
- regular expression operator 1
- system logging 1
- /* */, comment delimiters 1
- < >
- wildcard patterns 1
- >
- CLI prompt 1
- in statement lists 1
- ?
- regular expression operator 1
- system logging 1
- wildcard 1
- [ ]
- banners 1
- regular expression operator 1, 2, 3
- system logging 1
- wildcard characters 1
- ^
- regular expression operator 1, 2, 3
- system logging 1
- { }
- specifying statements 1
- |
- regular expression operator
- system logging 1
- | (pipe) 1
- filtering command output 1
A
- access
- tracing operations 1
- access permission bit 1
- access privilege levels
- entering configuration mode 1
- login classes 1
- permission bits 1
- user accounts 1
- access-control permission bit 1
- accounting statement 1
- authentication
- usage guidelines 1
- accounting-port statement 1
- usage guidelines 1
- activate command 1
- usage guidelines 1
- address statement 1
- usage guidelines 1
- addresses
- IP addresses 1
- router source addresses 1, 2
- address-pool statement 1
- usage guidelines 1
- address-range statement 1
- usage guidelines 1
- admin permission bit 1
- admin-control permission bit 1
- aggregated devices, configuring 1
- aggregated-devices statement 1
- usage guidelines 1
- aging timer
- ARP 1
- alarm conditions 1
- backup Routing Engine 1
- chassis alarm conditions 1
- silencing alarm devices 1
- alarm cutoff button 1
- alarm statement 1
- alert (system logging severity level 1) 1
- algorithm statement 1
- usage guidelines 1
- alias statement 1
- all (tracing flag)
- VRRP 1, 2
- all command output, displaying
- usage guidelines 1
- all permission bit 1
- allow-commands attribute (TACACS+) 1
- allow-commands statement 1
- usage guidelines 1
- allow-configuration attribute (TACACS+) 1
- allow-configuration statement 1
- usage guidelines 1
- allowing commands to login classes 1
- /altconfig directory 1
- alternate boot device 1
- alternative media 1, 2, 3
- /altroot directory 1
- annotate command 1
- usage guidelines 1
- announcement statement 1
- usage guidelines 1
- announcements
- system login 1
- any (system logging facility) 1
- any (system logging severity level) 1
- apply-groups statement 1
- usage guidelines 1
- apply-groups-except statement 1
- usage guidelines 1
- archival statement 1
- archive router configuration 1
- archive statement 1
- usage guidelines 1
- archive-sites statement 1
- usage guidelines 1
- ARP
- aging timer 1
- arp statement 1
- ATM 1, 2, 3
- ATM interfaces
- PIC alarm conditions 1
- ATM2 IQ interfaces
- Layer 2 circuit transport mode 1
- atm-cell-relay-accumulation statement 1
- usage guidelines 1
- atm-l2circuit-mode statement 1
- usage guidelines 1, 2
- auditing for security 1
- authentication
- diagnostics port 1
- diagnostics port password 1
- local user fallback mechanism 1
- NTP authentication keys 1
- order 1, 2, 3
- protocol 1
- RADIUS 1, 2, 3
- example 1
- root password 1
- shared user accounts 1, 2
- TACACS+ 1, 2, 3
- user accounts 1
- users 1
- authentication statement 1, 2
- usage guidelines 1, 2
- authentication-algorithm statement
- IKE 1
- usage guidelines 1
- IPSec 1
- usage guidelines 1
- authentication-key statement 1
- usage guidelines 1
- authentication-method statement
- IKE 1
- usage guidelines 1
- authentication-order statement 1, 2
- usage guidelines 1, 2, 3
- authorization (system logging facility) 1
- option to facility-override statement 1
- autoinstallation statement 1
- auxiliary port 1
- properties 1
- auxiliary statement 1
- usage guidelines 1
- auxiliary-spi statement 1
- usage guidelines 1
B
- backup router configuration 1
- backup routers 1, 2
- backup-router statement 1
- usage guidelines 1
- banners 1
- BGP
- routing protocol 1
- security configuration example 1
- boot
- devices 1
- sequences 1
- server, NTP 1
- boot-file statement 1
- BOOTP relay agent 1
- boot-server statement
- DHCP 1
- NTP 1
- usage guidelines 1
- broadcast
- NTP 1, 2
- synchronizing NTP 1
- broadcast messages, synchronizing NTP 1
- broadcast statement 1
- usage guidelines 1
- broadcast-client statement 1
- usage guidelines 1
C
- cache-size statement 1
- usage guidelines 1
- cache-timeout-negative statement 1
- usage guidelines 1
- ca-name statement 1
- usage guidelines 1
- ce1 statement 1
- usage guidelines 1
- certificates
- CA certificate 1
- signed certificate 1
- certificates statement 1
- usage guidelines 1
- certification-authority statement 1
- usage guidelines 1
- change-log (system logging facility) 1
- channel-group statement 1
- usage guidelines 1
- channelized DS3 to DS0 naming 1
- channelized E1 naming 1
- channelized mode 1
- CHAP 1
- usage guidelines 1
- chap-secret statement 1
- chassis
- configuration
- alarm conditions 1
- drop policies 1
- redundancy properties 1
- FPCs on routing matrix 1
- process 1
- routing matrix 1
- chassis interface names 1
- chassis statement 1
- usage guidelines 7631, 2
- class statement 1
- usage guidelines 1, 2
- clear command 1
- usage guidelines 1
- clear permission bit 1
- CLI 1
- command completion 1
- command history 1, 2
- comparing configuration versions 1
- date 1
- editing command line 1
- environment settings 1
- filtering command output 1
- hierarchy of commands 1, 2
- keyboard sequences 1, 2
- modes 1
- --More-- prompt 1
- overview 1
- prompt strings 1, 2
- routing matrix enhancements 1
- screen output 1
- type checking 1
- typing commands 1
- users, monitoring 1
- working directory 1, 2
- client address statement
- usage guidelines 1
- client mode, NTP 1, 2
- client statement 1
- usage guidelines 1
- client-identifier statement 1
- usage guidelines 1
- command hierarchy 1, 2
- command history
- configuration mode 1
- operational mode 1
- command output
- configuration details 1
- counting lines 1
- display end of output 1
- displaying all output 1
- filtering 1
- --More-- prompt 1
- multiple filters 1
- retaining 1
- saving to files 1
- string searches 1
- command output, filtering 1
- | (pipe) 1
- all output, displaying 1
- comparing configuration versions 1
- display end of output 1
- multiple filters 1
- retaining output 1
- saving to files 1
- string searches 1
- commands
- allowing or denying to login classes 1
- completion 1, 2
- configure 1
- filenames, specifying 1
- help about commands 1, 2, 3
- hierarchy 1, 2
- history 1, 2
- operational commands in configuration
mode, running 1- overview 1
- typing 1
- URLs, specifying 1
- commands for router management
- routing matrix 1
- comment character (#) in operational mode commands 1
- comments
- adding to configuration file 1
- See also configuration statements1
- commit | display detail command 1
- usage guidelines 1
- commit and-quit command 1
- usage guidelines 1
- commit at command 1
- usage guidelines 1
- commit check command 1
- usage guidelines 1
- commit command 1
- usage guidelines 1
- commit comment command 1
- usage guidelines 1
- commit confirmed command 1
- usage guidelines 1
- commit synchronize command 1
- usage guidelines 1
- committing configuration
- basic 1
- confirmation required 1
- and exiting configuration mode 1
- logging message about 1
- monitoring 1
- scheduling for later 1
- synchronizing on Routing Engines 1
- compare command 1
- usage guidelines 1
- compress-configuration-files statement 1
- usage guidelines 1
- compressing configuration files 1, 2
- concatenated mode 1
- /config directory
- copying contents before software installation 1
- location of configuration files 1
- configuration
- adding comments 1
- aggregated devices 1
- committing 1
- confirmation required 1
- and exiting configuration mode 1
- logging message about 1
- monitoring process 1
- scheduling for later 1
- synchronizing on Routing Engines 1
- comparing with previous 1
- copying
- file before software installation 1
- statements 1
- creating
- initial 1
- new hierarchy 1
- deactivating statement or identifier 1
- displaying
- current configuration 1
- details 1
- files See configuration files1
- groups See configuration groups1
- identifiers See identifiers1
- loading 1
- locking 1
- merging current and new 1
- modifying 1
- reactivating statement or identifier 1
- removing
- statements 1
- replacing 1
- rolling back to previous 1
- saving to file 1
- special symbols in 1
- statements See configuration statements1
- storage of previous 1
- verifying 1
- configuration files
- compressing 1, 2
- copying 1
- filename, specifying 1
- saving to files 1
- URL, specifying 1
- configuration groups
- applying 1
- copying configuration files 1
- creating 1
- example configuration groups 1
- inheritance model 1
- inherited values 1
- interface parameters 1, 2
- nested groups 1
- overview 1
- peer entities 1
- re0, re1 groups 1
- regional configurations 1
- sets of statements 1
- wildcards 1, 2
- configuration mode, CLI 1
- + 1
- > 1
- banners 1
- command completion 1
- command history 1
- commands 1
- commands summarized 1
- copying configuration 1
- copying configuration statements 1
- displaying current configuration 1
- entering configuration mode 1
- error messages 1, 2
- example 1
- exiting configuration mode 1
- loading configuration 1
- locking 1
- overview 1
- prompt 1
- running operational mode commands 1
- users editing configuration
- displaying 1
- multiple simultaneous users 1
- verifying configurations 1
- configuration statement 1
- usage guidelines 1
- configuration statements
- adding comments about 1
- copying 1
- deactivating 1
- hierarchy
- complete J-series 1
- complete JUNOS 1
- conceptual overview 1
- moving between levels 1
- inheriting from groups 1
- overviews 1
- reactivating 1
- removing 1
- specifying IP addresses in 1
- structure and components 1
- symbols, including in statements 1
- configuration-server statement 1
- configure command 1
- usage guidelines 1, 2
- configure exclusive command 1
- usage guidelines 1
- configure permission bit 1
- configure private command 1
- usage guidelines. 1
- conflict-log (system logging facility) 1
- connection-limit statement 1
- console port 1
- properties 1
- console statement
- physical port 1
- usage guidelines 1
- system logging 1
- usage guidelines 1
- container statements 1
- control permission bit 1
- conventions, documentation 1
- copy command 1
- usage guidelines 1, 2, 3
- copying configuration 1
- to a PC card or LS-120 MB floppy disk. 1
- copying configuration file 1
- copying statements in configurations 1
- core dump files
- usage guidelines 1
- count command 1
- counting output lines
- usage guidelines 1
- craft interface
- alarm conditions
- chassis 1
- M20 router 1
- M40 router 1
- M40e and M160 routers 1
- overview 1
- T320 router and T640 routing node 1
- alarm cutoff button 1
- critical (system logging severity level) 1
- crl statement 1
- usage guidelines 1
- Crypto Officer 1
- user configuration 1
- ct3 statement 1
- usage guidelines 1
- current configuration, displaying 1
- cursor, moving 1
- customer support
- contacting 1
D
- daemon (system logging facility) 1
- option to facility-override statement 1
- data types, CLI 1
- database (tracing flag) 1, 2
- date
- setting 1
- setting from NTP servers 1, 2
- deactivate command 1
- usage guidelines 1
- deactivating statements and identifiers 1
- debug (system logging severity level) 1
- default configuration group 1
- default-address-selection statement 1
- usage guidelines 1
- default-lease-time statement 1
- usage guidelines 1
- delete command 1
- usage guidelines 1
- deny-commands attribute (TACACS+) 1
- deny-commands statement 1
- usage guidelines 1
- deny-configuration attribute (TACACS+) 1
- deny-configuration statement 1
- usage guidelines 1
- denying commands to login classes 1
- description statement
- IKE policy 1
- usage guidelines 1
- IKE proposal 1
- usage guidelines 1
- IPSec policy 1
- usage guidelines 1
- IPSec proposal 1
- usage guidelines 1
- IPSec SA 1
- usage guidelines 1
- usage guidelines 1, 2, 3
- destination option 1, 2
- destination statement 1
- usage guidelines 1
- device-count statement 1
- usage guidelines 1
- dhcp statement 1
- usage guidelines 1
- dh-group statement 1
- usage guidelines 1
- diagnostics port password 1, 2
- diag-port-authentication statement 1
- usage guidelines 1
- direction statement 1
- usage guidelines 1, 2
- direction, IPSec 1
- directories
- JUNOS software 1
- disable statement
- usage guidelines 1
- disabling
- software processes 1
- display detail command 1
- usage guidelines 1
- display inheritance command 1
- usage guidelines 1
- display set command 1
- usage guidelines 1
- display xml command 1
- DNS name servers 1
- documentation conventions 1
- domain names on routers 1
- domain-name statement 1
- usage guidelines 1
- domains to be searched 1, 2
- domain-search statement 1
- usage guidelines 1
- downloading software packages 1
- drop policies 1
- drop-timeout statement 1
- usage guidelines 1
- DS1 interfaces, PIC alarm conditions 1
- dump-device statement 1
- dynamic security associations 1
- dynamic security associations (IPSec) 1
- dynamic service activation 1
- dynamic statement 1
- usage guidelines 1
E
- e1 statement 1
- usage guidelines 1
- E3 interfaces
- PIC alarm conditions 1
- edit command 1
- usage guidelines 1, 2
- editing command line 1
- Emacs keyboard sequences 1
- emergency (system logging severity level) 1
- encoding statement 1
- usage guidelines
- certificate authority 1
- IKE policy 1
- encrypted passwords 1, 2
- encrypted-password option 1
- encryption statement 1
- usage guidelines 1, 2
- encryption-algorithm statement 1
- usage guidelines
- IKE 1
- IPSec 1
- encryption-algorithm statement (IKE)
- usage guidelines 1
- enrollment-retry statement 1
- usage guidelines 1
- enrollment-url statement 1
- usage guidelines 1
- environment settings, CLI
- command completion 1
- configuring 1
- date setting from NTP servers 1, 2
- displaying 1
- example configuration 1
- idle timeout 1
- prompt string 1
- screen dimensions 1, 2
- software upgrade, restarting after 1
- terminal type 1
- time setting from NTP servers 1, 2
- working directory 1, 2
- error (system logging severity level) 1
- error messages
- CLI 1
- ES PIC 1
- Ethernet 1
- management port 1
- PIC alarm conditions 1
- ethernet statement 1
- usage guidelines 1
- events statement 1
- usage guidelines 1
- except command 1
- exit command 1
- usage guidelines 1, 2
- exit configuration-mode command 1
- usage guidelines 1
- explicit-priority statement 1
- usage guidelines
- routing matrix 1
- single-chassis system 1
- export routing policies 1
F
- facilities (system logging)
- alternate for remote machine 1
- default for remote machine 1
- for local machine 1
- mapping of codes to names 1
- facility-override statement 1
- system logging
- usage guidelines 1
- failover statement
- usage guidelines 1
- failover, configuring 1
- fan alarm conditions
- M20 routers 1
- M320 routers 1
- M40 routers 1
- M40e and M160 routers 1
- M5 and M10 routers 1
- M7i and M10i routers 1
- FEB alarm condition 1
- field permission bit 1
- file archive command 1
- file command 1
- usage guidelines 1, 2
- file compare command 1
- file copy command 1
- usage guidelines 1
- file delete command 1
- file list command 1
- file rename command 1
- file show command 1
- file statement
- security 1
- usage guidelines 1
- system logging 1
- usage guidelines 1
- file systems
- backing up 1
- filenames, specifying in commands 1
- files
- configuration files, compressing 1
- configuration files, copying 1
- configuration, compressing 1
- saving command output 1
- saving configurations to files 1
- system log messages, archiving 1
- files statement 1
- system logging
- usage guidelines 1
- filtering command output
- all output, displaying 1
- find command 1
- finger statement 1
- usage guidelines 1
- FIPS
- user configuration 1
- See also JUNOS-FIPS1
- FIPS 140-2 compliance 1
- firewall (system logging facility) 1
- firewall filters 1
- security configuration example 1
- firewall permission bit 1
- firewall-control permission bit 1
- flash drives
- mirroring to hard disk 1
- storage media overview 1
- floppy permission bit 1
- forwarding table 1
- FPC
- routing matrix 1
- FPC alarm condition
- M20 routers 1
- M320 routers 1
- M40 routers 1
- M40e and M160 routers 1
- M5 and M10 routers 1
- T320 routers and T640 routing nodes 1
- fpc statement 1
- usage guidelines 1
- fragmentation-threshold statement 1
- usage guidelines 1
- Frame Relay 1
- framed-ip-address statement 1
- usage guidelines 1
- framed-pool statement 1
- usage guidelines 1, 2
- framing statement
- usage guidelines 1
- ftp (system logging facility) 1
- option to facility-override statement 1
- FTP service, configuring 1
- ftp statement 1
- usage guidelines 1
- full names, in user accounts 1
- full-name statement 1
- usage guidelines 1
G
- general (tracing flag) 1, 2
- global tracing operations 1
- GMPLS 1
- graceful-switchover statement 1
- usage guidelines 1
- GRE encapsulation 1
- group-profile statement 1
- usage guidelines 1, 2
- groups statement 1
- usage guidelines 1
H
- halt two Routing Engines simultaneously 1
- halts
- router software, routing matrix 1
- hard disk
- mirroring flash drives 1
- storage media overview 1
- hard disk errors 1
- hardware components 1
- help apropos command 1
- usage guidelines 1, 2
- help command 1, 2
- usage guidelines 1, 2
- help reference command 1, 2
- usage guidelines 1, 2
- help syslog command 1
- help tip cli command 1
- usage guidelines 1
- help topic command 1, 2
- hierarchy
- CLI commands 1
- configuration statements
- complete J-series 1
- complete JUNOS 1
- conceptual overview 1
- levels 1
- moving between levels 1
- See also configuration statements1
- history, CLI commands
- configuration mode 1
- operational mode 1
- HMAC-MD5 authentication 1
- hold command 1
- usage guidelines 1
- host statement 1
- system logging
- usage guidelines for routing matrix 1
- usage guidelines for single-chassis system 1
- host-name statement 1
- usage guidelines 1
- hot-swapping alarm condition 1
- http statement 1
- https statement 1
I
- icons defined, notice 1
- identifiers
- deactivating 1
- inserting in sequential lists 1
- reactivating 1
- renaming 1
- specifying 1
- identity statement 1
- usage guidelines 1
- idle timeout values
- CLI sessions 1
- login classes 1
- idle-cell-format statement 1
- usage guidelines 1
- idle-timeout statement 1, 2
- usage guidelines 1
- IKE 1, 2
- authentication algorithm 1
- authentication method 1
- DH group
- usage guidelines 1
- Diffie-Hellman group 1
- dynamic SAs 1
- encryption algorithm 1
- encryption-algorithm statement
- usage guidelines 1
- lifetime statement
- usage guidelines 1
- policy configuration, example 1
- policy description 1
- policy mode 1
- policy statement
- usage guidelines 1
- preshared key 1
- proposal description 1
- proposals associated with policy 1
- SA lifetime 1
- ike statement 1
- usage guidelines 1
- ILMI with cell relay 1
- import routing policies 1
- inactive tag 1
- inet statement 1
- usage guidelines 1
- inet6-backup-router statement
- usage guidelines 1
- inet-backup-router statement 1
- info (system logging severity level 6) 1
- inheritance model, configuration groups 1
- inherited values, configuration groups 1
- insecure statement 1
- usage guidelines 1
- insert command 1
- usage guidelines 1
- interactive-commands (system logging facility) 1
- interface naming
- routing matrix 1
- TX Matrix platform 1
- interface-control permission bit 1
- interface-id statement 1
- usage guidelines 1, 2, 3
- interfaces
- media parameters 1, 2
- permission bit 1
- process 1
- security configuration example 1
- tracing operations 1
- interfaces (tracing flag) 1, 2
- interfaces statement 1
- internal statement 1
- usage guidelines 1
- Internet drafts supported 1
- internet-options statement 1
- IP addresses 1
- router mapping 1
- router names, mapping 1
- specifying in configuration statements 1
- IP multicast 1
- IP packets
- router source addresses 1, 2
- IP traffic, discarding 1
- IP-IP encapsulation 1
- IPSec
- algorithm 1
- authentication 1
- authentication algorithm 1
- auxiliary security parameter index 1
- configuring 1
- configuring internal 1
- direction 1, 2
- direction of processing 1
- dynamic security associations 1
- usage guidelines 1
- encryption 1, 2, 3
- encryption algorithm 1, 2
- ES PIC 1
- example 1
- inbound traffic filter, applying 1
- inbound traffic filter, configuring 1
- outbound traffic filter, applying 1
- outbound traffic filter, configuring 1
- example configuration
- outbound traffic 1
- IKE 1
- internal 1
- key 1
- lifetime of SA 1
- manual 1, 2
- minimum configurations
- dynamic SA 1
- manual SA 1
- overview 1
- Perfect Forward Secrecy 1
- policy 1
- proposal 1
- proposal description 1
- SA description 1
- security associations 1
- security parameter index 1
- security services overview 1
- SPI 1
- statements 1
- traffic 1
- ipsec statement 1
- usage guidelines 1
- ipsec-policy statement 1
- usage guidelines 1
- IS-IS
- routing protocol 1, 2
- security configuration example 1
- ISO standards supported 1
- issuing relative configuration commands 1
J
- jbundle software package 1
- jinstall software package 1
- jkernel software package 1
- jpfe software package 1
- jroute software package 1
- J-series Services Routers 1
- access configuration hierarchy 1
- accounting-options configuration hierarchy 1
- applications configuration hierarchy 1
- chassis configuration hierarchy 1
- class-of-service configuration hierarchy 1
- complete configuration mode commands 1
- complete configuration statement
hierarchy 1- configuration mode commands and
statements 1- firewall configuration hierarchy 1
- forwarding-options configuration
hierarchy 1- groups configuration hierarchy 1
- interfaces configuration hierarchy 1
- policy-options configuration hierarchy 1
- protocols configuration hierarchy 1
- routing-options configuration hierarchy 1
- security configuration hierarchy 1
- services configuration hierarchy 1
- snmp configuration hierarchy 1
- system configuration hierarchy 1
- juniper.conf file, compressing 1, 2
- Juniper-Allow-Commands attribute (RADIUS) 1
- Juniper-Allow-Configuration attribute (RADIUS) 1
- Juniper-Deny-Commands attribute (RADIUS) 1
- Juniper-Deny-Configuration attribute (RADIUS) 1
- Juniper-Local-User-Name attribute (RADIUS) 1
- junos default groups 1
- JUNOS software
- boot sequence 1
- configuration overview 1
- directories stored in 1
- factory (pre-installed) 1
- initial router configuration 1
- installation overview 1
- package naming conventions 1
- rebooting or halting 1
- reconfiguring 1
- release naming conventions 1
- standards supported 1
- storage media 1
- upgrading 1
- upgrading to JUNOS-FIPS 1
- JUNOScript SSL Service 1
- JUNOScript xml-ssl service 1
- junos-defaults 1
- usage guidelines 1
- junos-defaults group, displaying 1, 2
- JUNOS-FIPS
- commands 1
- dual Routing Engines 1
- IPSec requirements 1, 2
- network security 1
- password requirements 1, 2, 3, 4, 5
- remote services 1
- security compliance 1
- software environment 1
- upgrading to 1
- user accounts 1
- J-Web user interface 1
- starting 1
K
- keepalive statement 1
- usage guidelines 1, 2
- keepalive-time statement 1
- usage guidelines 1
- kernel (system logging facility) 1
- option to facility-override statement 1
- kernel, Routing Engine 1
- key statement 1
- usage guidelines 1
- key, IPSec 1
- keyboard sequences
- editing command line 1
- --More-- prompt 1
L
- l2tp statement 1
- usage guidelines 1, 2
- last command 1
- usage guidelines 1
- LCC
- checking status 1
- numbers 1
- prefix 1
- T640 routing node 1
- TX Matrix platform 1, 2, 3
- lcc statement 1
- usage guidelines 1
- lcp-negotiation statement
- usage guidelines 1
- lcp-renegotiation statement 1
- usage guidelines 1, 2
- ldap-url statement 1
- usage guidelines 1
- LDP 1
- leaf statements 1
- lifetime-seconds statement 1
- usage guidelines
- IKE 1
- IPSec 1
- line-card chassis See LCC1, 2
- Link Services PIC 1
- lo0 interface 1, 2
- load command 1
- usage guidelines 1
- load merge command 1
- usage guidelines 1
- load override command 1
- usage guidelines 1
- load patch command 1
- load replace command 1
- usage guidelines 1
- load update command 1
- usage guidelines 1
- load-key-file command
- usage guidelines 1, 2
- load-key-file statement 1
- usage guidelines 1, 2
- local password authentication 1
- local statement 1
- usage guidelines 1
- local user
- fallback mechanism 1
- template accounts 1
- template example 1
- local[0-7] (system logging facility) 1
- local-certificate statement 1, 2
- usage guidelines 1
- local-chap statement 1
- usage guidelines 1
- local-key-pair statement 1
- usage guidelines 1
- local-user-name attribute (TACACS+) 1
- location statement 1
- usage guidelines 1
- locking configuration 1
- log files
- redundancy logging 1
- logging in as root 1
- logging operations
- security configuration example 1
- tracing operations 1
- logical devices 1
- logical router
- restarting 1
- login announcements, system 1
- login classes
- access privilege levels 1
- commands, allowing or denying 1
- default classes 1
- defining 1, 2
- idle timeout values 1
- security configuration example 1
- login messages, system 1
- login statement 1, 2
- usage guidelines 1, 2
- login-alarms statement 1
- usage guidelines 1
- login-tip statement 1
- usage guidelines 1
- log-out-on-disconnect statement 1
- usage guidelines 1
- log-prefix statement
- system logging 1
- usage guidelines 1
M
- maintenance permission bit 1
- management Ethernet interface
- PIC alarm conditions 1
- management process 1
- manual security association 1
- manual statement 1
- usage guidelines 1, 2
- match command 1
- usage guidelines 1
- match statement 1
- usage guidelines 1
- max-configurations-on-flash statement 1
- usage guidelines 1
- maximum-certificates statement 1
- usage guidelines 1
- maximum-lease-time statement 1
- usage guidelines 1, 2
- maximum-sessions-per-tunnel statement 1
- usage guidelines 1
- max-queues-per-interface statement 1
- usage guidelines 1
- MD5 authentication 1
- message statement 1
- usage guidelines 1
- messages
- broadcast messages, NTP 1, 2
- error 1
- multicast, NTP 1
- redirect 1
- system login 1
- MIB II process 1
- MIB standards supported 1
- mirror-flash-on-disk statement 1
- usage guidelines 1
- mlfr-uni-nni-bundles statement 1
- usage guidelines 1
- mode statement
- IKE 1
- usage guidelines 1
- IPSec 1
- usage guidelines 1
- modifying configurations 1
- monitor command 1, 2
- monitoring tools
- overview 1
- tracing operations 1
- --More-- prompt 1
- MPLS
- routing tables 1
- supported Internet standards and drafts. 1
- mtrace command
- IP multicast 1
- multicast
- NTP messages 1
- routing table 1
- multicast-client statement 1
- usage guidelines 1
- multilink statement 1
- usage guidelines 1
- multiplexed mode 1
N
- name servers, DNS 1
- names
- domain names on routers 1
- JUNOS packages 1
- JUNOS releases 1
- names 1
- router 1
- wildcard 1
- name-server statement 1
- usage guidelines 1
- nested configuration groups 1
- network
- masks 1
- permission bit 1
- no-compression-configuration-files statement 1
- usage guidelines 1
- no-concatenate statement 1
- usage guidelines 1
- no-more command 1, 2
- usage guidelines 1
- non-concatenated mode 1
- none (system logging severity level) 1
- no-packet-scheduling statement 1
- usage guidelines 1
- no-redirects statement 1
- usage guidelines 1
- normal (tracing flag) 1, 2
- no-saved-core-context statement 1
- usage guidelines 1
- no-source-route statement 1
- usage guidelines 1
- notice (system logging severity level) 1
- notice icons defined 1
- no-validate command 1, 2
- no-world-readable statement
- system logging 1
- usage guidelines 1
- NTP
- authentication keys 1
- boot server 1
- broadcast mode 1, 2
- client mode 1, 2
- configuring 1
- listening for broadcast messages 1, 2
- listening for multicast messages 1
- security configuration example 1
- server mode 1
- set date ntp 1
- symmetric active mode 1, 2
- ntp statement 1
- usage guidelines 1
O
- offline statement 1, 2
- usage guidelines 1
- on-disk-failure statement 1
- usage guidelines 1, 2
- online-expected statement 1
- usage guidelines 1
- on-loss-of-keepalives statement 1
- usage guidelines 1
- operational mode, CLI
- command history 1
- command overview 1
- date, setting 1
- running commands in configuration mode 1
- users, monitoring 1
- operator login class 1
- operators, regular expression 1, 2, 3
- system logging 1
- OSPF
- standards supported 1
- other-routing-engine option to host statement 1
- usage guidelines
- routing matrix 1
- single-chassis system 1
P
- packages
- between Routing Engines 1
- JUNOS software 1
- transferring between Routing Engines 1
- Packet Forwarding Engine 1
- packet scheduling 1
- packets
- router source addresses 1, 2
- packets (tracing flag) 1, 2
- packet-scheduling statement 1
- usage guidelines 1
- pap-password statement 1
- usage guidelines 1
- passive ARP learning
- VRRP 1
- passwords
- diagnostics port 1, 2
- RADIUS 1
- root 1
- shared user 1
- shared user accounts 1
- user accounts 1
- path-length statement 1
- usage guidelines 1
- path-mtu-discovery statement 1
- usage guidelines 1
- peer entities 1
- peer statement 1
- usage guidelines 1
- perfect-forward-secrecy statement 1
- usage guidelines 1
- permission bits 1
- permissions statement 1
- usage guidelines 1
- pfe (system logging facility) 1
- physical devices, aggregating 1
- physical interfaces
- framing modes 1
- PIC combinations
- invalid 1
- pic statement 1
- usage guidelines 1
- pic-console-authentication statement 1
- ping command 1
- usage guidelines 1
- pipe ( | )
- filtering command output 1
- usage guidelines 1
- plain-text passwords 1
- for a diagnostic port 1
- for user accounts 1
- root password 1
- usage guides 1
- plain-text-password option 1
- policy statement
- IKE 1
- usage guidelines, digital certificates 1
- usage guidelines, preshared keys 1
- IPSec 1
- usage guidelines 1
- pool statement 1
- port statement 1, 2
- HTTP/HTTPS 1
- RADIUS 1
- SDX 1
- TACACS+ 1
- usage guidelines 1
- usage guidelines 1, 2, 3
- ports
- auxiliary port properties 1
- console port properties 1
- diagnostics port 1, 2
- external ports 1
- insecure 1
- log-out-on-disconnect 1
- RADIUS server 1
- ports statement 1
- power supply alarm conditions 1
- ppp statement 1
- usage guidelines 1
- PPP, overview 1
- ppp-authentication statement 1
- usage guidelines 1, 2
- prefixes
- specifying in configuration statements 1
- pre-shared-key statement 1
- usage guidelines 1
- primary boot device 1
- primary-dns statement 1
- usage guidelines 1, 2
- primary-wins statement 1
- usage guidelines 1, 2
- priorities
- system logging, including in log message
- for routing matrix 1
- for single-chassis system 1
- processes
- configuring failover 1, 2
- disabling 1
- processes statement 1
- usage guidelines 1
- profile statement 1
- usage guidelines 1, 2
- prompt strings
- # 1
- > 1
- CLI 1, 2
- configuration mode 1
- --More-- prompt 1
- usage guidelines 1
- proposal statement 1
- IKE
- usage guidelines 1
- IPSec
- usage guidelines 1
- proposals statement 1
- usage guidelines
- IKE 1
- IPSec 1
- protocol
- for dynamic SA 1
- for internal SA 1, 2
- for manual SA 1
- protocol statement 1
- usage guidelines
- dynamic SA 1
- internal SA 1
- manual SA 1
- protocols
- authentication 1
- redirect messages 1
- protocol-specific tracing operations 1
- protocol-version statement 1
Q
- quit command 1, 2, 3
R
- RADIUS authentication 1, 2, 3
- in a private network 1
- L2TP 1
- security configuration example 1
- TACACS+ 1
- RADIUS authorization See RADIUS authentication1
- RADIUS templates
- security configuration example 1
- radius-disconnect statement 1
- radius-disconnect-port statement 1
- usage guidelines 1
- radius-server statement 1, 2
- usage guidelines 1, 2
- rate-limit statement 1
- usage guidelines 1
- re0 configuration group 1
- re1 configuration group 1
- reactivating statements and identifiers 1
- read-only login class 1
- rebooting router software
- routing matrix 1
- reconfiguring JUNOS software 1
- red alarm conditions 1
- redirect messages
- disabling 1
- redrawing screen 1
- redundancy
- configuring failover 1, 2
- logging 1
- SFM 1
- SSB 1
- synchronize Routing Engines 1
- redundancy statement 1
- usage guidelines 1, 2
- regional configurations 1
- regular expression operators 1, 2, 3
- system logging 1
- relative option 1
- release names 1
- releases, upgrading to 1
- remote
- access, configuring 1
- template account 1
- user names 1
- removable media 1
- removable storage media 1
- removing statements from configurations 1
- rename command 1
- usage guidelines 1
- renaming identifiers 1
- replace option 1
- replay-window-size statement 1
- usage guidelines 1
- request chassis command 1
- request command 1
- usage guidelines 1
- request flow-collector command 1
- request ipsec switch command 1
- request message command 1
- request routing-engine command 1
- request security certificate command 1, 2
- usage guidelines 1
- request security command 1
- request security key-pair
- usage guidelines 1
- request services command 1
- request support information command 1
- request system command 1
- usage guidelines 1
- request system configuration rescue command
- usage guidelines 1
- request system configuration rescue delete
command 1- request system configuration rescue save
command 1- request system halt both-routing-engines command
- usage guidelines 1
- request system logout pid pid_number
command 1- request system snapshot command
- usage guidelines 1
- rescue configuration 1
- reset permission bit
- usage guidelines 1
- resolve command 1
- restart command 1
- usage guidelines 1
- restart routing command 1
- restart routing logical-router command 1
- restarting
- after software upgrade 1
- retaining command output 1
- retry statement 1, 2
- usage guidelines 1
- RIP
- routing protocol 1
- rlogin service, configuring 1
- rollback command 1
- usage guidelines 1
- rollback permission bit 1
- root file system, backing up 1
- root password 1
- root-authentication statement 1
- usage guidelines 1
- root-login statement 1
- usage guidelines 1
- route prefixes 1
- router access 1
- router chassis See chassis1
- router drop policy 1
- router security 1
- auditing for security 1
- default settings 1
- firewall filters 1
- router access 1
- routing protocol security features 1
- user authentication 1
- router statement 1
- routers
- backup 1, 2
- boot devices 1
- boot sequence 1
- DNS name servers, configuring 1
- domain names 1
- domains to be searched 1, 2
- failover, configuring 1, 2
- hardware components 1
- initial software configuration 1
- login classes 1
- names
- configuring 1, 2
- mapping to IP addresses 1, 2
- NTP 1
- Packet Forwarding Engine 1
- physical system location 1
- ports
- auxiliary port properties 1
- console port properties 1
- diagnostics port 1, 2
- RADIUS server 1
- redirect 1
- root login, controlling 1
- Routing Engine 1, 2
- software processes, disabling 1
- source addresses 1, 2
- storage media 1
- system services, configuring 1
- time zone setting 1
- user accounts 1
- Routing Engines 1
- chassis process 1
- kernel 1
- management process 1
- MIB II process 1
- overview 1
- redundancy behavior 1
- routing matrix 1
- routing protocol process 1
- SNMP process 1
- software components 1
- synchronizing configuration 1
- tty connections 1
- routing matrix 1, 2
- CLI enhancements 1
- configuration guidelines 1, 2
- configuring T640 routing nodes offline 1
- FPC slot number 1
- halting 1
- interface naming 1
- LCC 1
- online expected alarm 1
- overview 1
- rebooting 1
- Routing Engines 1
- system logging 1
- upgrading software 1
- routing permission bit 1
- routing protocol process
- IPv4 routing protocols 1
- IPv6 routing protocols 1
- routing policy 1
- routing tables 1
- routing protocol security features 1
- routing protocols, overview 1
- routing tables 1
- routing-control permission bit 1
- routing-engine (Reboot on Disk Failure)
statement 1- routing-engine (Redundancy) statement 1
- routing-engine statement
- usage guidelines 1, 2
- routing-instance statement 1, 2, 3
- usage guidelines 1
- RSVP 1
- run command 1
- usage guidelines 1
- running operational commands 1
S
- save command 1, 2
- usage guidelines 1, 2
- saved-core-context statement 1
- usage guidelines 1
- saved-core-files statement 1
- usage guidelines 1
- SCB alarm condition 1
- SCC 1, 2, 3
- system logging 1
- scc-master option to host statement 1
- usage guidelines 1
- scheduling packets 1
- screen
- dimensions 1, 2
- redrawing 1
- SDH
- interfaces
- framing 1
- framing mode 1
- PIC alarm conditions 1
- supported standards 1
- SDX software 1, 2
- searching
- regular expressions 1
- strings in command output 1
- secondary-dns statement 1
- usage guidelines
- group profile 1
- profile 1
- secondary-wins statement 1
- usage guidelines
- group profile 1
- profile 1
- secret permission bit 1
- secret statement
- access 1
- usage guidelines, RADIUS authentication 1
- usage guidelines, RADIUS disconnect 1
- authentication 1
- usage guidelines, RADIUS 1
- usage guidelines, TACACS+ 1
- secret-control permission bit 1
- security
- configuration example 1
- tracing operations 1
- security association statement
- usage guidelines 1
- security certificate
- requesting 1
- signed, requesting 1
- security permission bit 1
- security services configuration guidelines 1
- security-association statement 1
- usage guidelines 1
- security-control permission bit 1
- server mode, usage guidelines 1
- server statement
- usage guidelines 1
- server-identifier statement 1
- servers statement 1
- usage guidelines 1
- service-deployment statement 1
- usage guidelines 1
- services statement 1
- usage guidelines 1
- set cli complete-on-space command 1
- usage guidelines 1
- set cli directory command 1
- usage guidelines 1, 2
- set cli idle-timeout command 1
- usage guidelines 1
- set cli prompt command 1
- usage guidelines 1
- set cli restart-on-upgrade command 1
- usage guidelines 1
- set cli screen-length command 1
- usage guidelines 1, 2
- set cli screen-width command 1
- set cli terminal command 1
- usage guidelines 1
- set cli timestamp 1
- set command
- configuration mode 1
- usage guidelines 1
- operational mode 1
- usage guidelines 1
- set date and time from NTP servers 1
- set date command 1
- set date ntp command 1
- usage guidelines 1
- set date ntp source-address command 1
- usage guidelines 1
- severity levels for system logging 1
- sfm (offline) statement 1
- sfm (power off) statement 1
- sfm (redundancy) statement 1
- sfm statement
- usage guidelines 1
- SFMs
- alarm condition 1
- redundancy 1
- shared user accounts 1
- shared-secret statement 1
- usage guidelines 1
- shell permission bit 1
- show | display inheritance defaults command 1
- usage guidelines 1
- show | display set command 1
- usage guidelines 1
- show | display set relative command 1
- usage guidelines 1
- show cli command 1
- usage guidelines 1
- show cli history command 1
- usage guidelines 1
- show command
- configuration mode 1
- warnings about missing statements 1
- operational mode 1
- usage guidelines 1
- show configuration command 1
- usage guidelines 1
- show groups junos-defaults command 1
- usage guidelines 1
- simple authentication 1
- single-connection statement 1
- usage guidelines 1
- size statement 1
- system logging 1
- SNMP
- security configuration example 1
- SNMP control permission bit 1
- snmp permission bit 1
- SNMP process 1
- software processes
- configuring failover 1, 2
- disabling 1
- software See JUNOS software1
- SONET
- interfaces
- framing 1
- framing mode 1
- PIC alarm conditions 1
- supported standards 1
- sonet statement 1
- usage guidelines 1
- source-address statement
- NTP 1
- usage guidelines 1
- RADIUS and TACACS+ 1
- usage guidelines 1
- SDX 1
- usage guidelines 1
- system logging 1
- usage guidelines for routing matrix 1
- usage guidelines for single-chassis
system 1- source-port statement 1
- usage guidelines 1, 2
- source-quench statement
- usage guidelines 1
- source-route constraints 1
- source-route statement 1
- usage guidelines 1
- sparse-dlcis statement 1
- usage guidelines 1
- SPI
- IPSec 1
- spi statement 1
- usage guidelines 1, 2
- SSB
- alarm condition 1, 2
- redundancy 1
- ssb statement 1
- usage guidelines 1
- ssh command 1
- usage guidelines 1
- ssh key files 1
- ssh service
- configuring 1
- root login 1
- ssh protocol version 1
- ssh statement 1
- usage guidelines 1
- SSL 1
- standards supported by JUNOS software 1
- start command 1
- state (tracing flag) 1, 2
- statements See configuration statements, names of individual statements1
- static-binding statement 1
- static-host-mapping statement 1
- usage guidelines 1
- status command 1
- usage guidelines 1
- storage media 1
- storing previous configurations 1
- strings, searching command output 1
- subnet masks 1
- super-user login class 1
- support, technical
- customer support, contacting 1
- supported
- Internet RFCs and drafts 1
- switch-card chassis See SCC1
- symmetric active mode, NTP
- configuring 1
- defined 1
- synchronizing Routing Engines 1
- sysid statement 1
- usage guidelines 1
- syslog statement
- system processes 1
- usage guidelines 1
- system authentication
- authentication order 1
- RADIUS
- configuring 1
- example 1
- remote template accounts 1
- TACACS+ 1
- system identifier, IS-IS
- configuring 1
- system logging
- configuration statements 1
- different on each node in routing matrix 1
- disabling 1
- examples 1
- facilities
- alternate for remote machine 1
- default for remote machine 1
- for local machine 1
- mapping of codes to names 1
- files, archiving 1
- forwarding messages in routing matrix 1
- regular expression filtering 1
- regular expression operators 1
- severity levels 1
- timestamp, modifying 1
- system login 1
- system permission bit 1
- system services
- DHCP 1, 2
- finger 1
- ftp 1
- ssh 1
- telnet 1
- system statement 1
- usage guidelines 1
- system-control permission bit 1
T
- t1 statement 1
- usage guidelines 1
- T3 interfaces
- PIC alarm conditions 1
- T640 routing nodes 1, 2
- role in routing matrix 1
- TACACS+ accounting 1
- TACACS+ authentication
- configuring 1
- overview 1
- tacplus-options statement 1
- usage guidelines 1
- tacplus-server statement 1
- usage guidelines 1
- TCP
- TCP/IP v4, RFCs 1
- technical support
- customer support, contacting 1
- telnet
- service, configuring 1
- telnet command 1
- usage guidelines 1
- telnet statement 1
- usage guidelines 1
- temperature alarm conditions 1
- template accounts 1, 2
- terminal option 1
- terminal type 1, 2, 3
- test command 1
- usage guidelines 1
- time
- security configuration example 1
- setting from NTP servers 1, 2
- setting from the CLI 1
- time zone setting, routers 1
- time-format statement 1
- usage guidelines 1
- timeout statement
- access 1
- usage guidelines 1
- authentication 1
- usage guidelines, RADIUS 1
- usage guidelines, TACACS+ 1
- timer (tracing flag) 1, 2
- timeslots statement 1
- usage guidelines 1
- time-zone statement 1
- usage guidelines 1
- top command 1
- usage guidelines 1, 2
- trace operations
- VRRP 1, 2
- trace permission bit 1
- trace-control permission bit 1
- traceoptions statement
- access 1
- usage guidelines 1
- security 1
- usage guidelines 1
- VRRP
- usage guidelines 1, 2
- traceroute command 1
- usage guidelines 1
- tracing operations 1
- access 1
- DVMRP 1
- security 1
- traffic
- configuring IPSec 1
- inbound (application of filter) 1
- inbound (decryption) 1
- outbound (application of filter) 1
- outbound (encryption) 1
- transfer-interval statement 1
- usage guidelines 1
- transfer-on-commit statement 1
- usage guidelines 1
- transferring router configuration to archive site 1
- trim command 1
- trusted-key statement 1
- usage guidelines 1
- tty connections between Routing Engines 1
- TX Matrix platform
- chassis and interface names 1
- commands for router management 1
- committing configurations 1
- configuration groups 1
- configuration groups example 1
- configure a T640 routing node 1
- copying a configuration file 1
- interface naming 1
- offline 1
- online expected alarm 1
- overview 1
- rebooting process 1
- reinstallation 1
- request routing-engine command 1
- request routing-engine login command 1
- router chassis properties 1
- running different JUNOS releases 1
- SCC in CLI 1
- software upgrades 1
- syslog messages 1
- system logging 1
- type checking, CLI 1
- type statement
- auxiliary port 1
- usage guidelines 1
- console port 1
- usage guidelines 1
- typefaces, documentation conventions 1
U
- uid statement 1
- usage guidelines 1
- UIDs 1
- unauthorized login class 1
- unicast routing table 1
- up command 1
- usage guidelines 1, 2
- update command 1
- usage guidelines 1
- updating configure private configuration 1
- upgrade, restarting after 1
- upgrading software 1, 2
- routing matrix 1
- URLs, specifying in commands 1
- user (system logging facility) 1
- option to facility-override statement 1
- user access
- login classes 1
- user accounts 1, 2
- user accounts
- authentication method and password 1
- configuring 1
- in JUNOS-FIPS 1
- security configuration example 1
- shared user accounts 1
- user authentication
- methods for 1
- overview 1
- user identifiers See UIDs1
- user interface
- overview 1
- user statement
- access 1
- usage guidelines 1
- system logging 1
- usage guidelines 1
- user-group-profile statement 1
- usage guidelines 1
- users
- editing configuration
- displaying 1
- multiple simultaneous users 1
- of CLI, monitoring 1
V
- validate command 1
- usage guidelines 1
- /var/db/config directory 1
- /var directory 1
- /var/home directory 1
- /var/log directory 1
- /var/tmp directory 1
- view permission bit 1
- virtual links
- aggregated devices 1
- voice services 1
- VPNs 1
- vrf-mtu-check statement 1
- usage guidelines 1
- VRRP
- passive ARP learning 1
- trace operations 1, 2
- tracing flag 1, 2
- vtmapping statement 1
- usage guidelines 1
W
- warning (system logging severity level) 1
- web-management statement 1
- wildcard characters 1
- wildcard delete command 1
- usage guidelines 1
- wildcard names 1, 2
- wins-server statement 1
- usage guidelines 1
- world-readable statement
- system logging 1
- usage guidelines 1
X
- xnm-clear-text statement 1
- usage guidelines 1
- xnm-ssl statement 1
- usage guidelines 1
Y
- yellow alarm condition 1