request mpls lsp adjust-autobandwidth

Syntax

request mpls lsp adjust-autobandwidth 

<logical-router (all | logical-router-name)>

<lsp-name> 

Description

Manually trigger a bandwidth allocation adjustment for active LSP paths. If you do not specify an LSP or a logical router, bandwidth allocation is adjusted on all the LSPs on the router is adjusted.

Options

none—Manually trigger a bandwidth allocation adjustment for all active LSP paths on all logical routers.

logical-router (all | logical-router-name)—(Optional) Perform this operation on all logical routers or on a particular logical router.

lsp-name—(Optional) Manually trigger a bandwidth allocation adjustment on the specified LSP only.

Additional Information

To use this command, the following must be true:

• Automatic bandwidth allocating must be enabled on the LSP.
• The criteria required to trigger a bandwidth adjustment have been met (the difference between the adjust bandwidth and the current LSP path bandwidth is greater than the threshold limit).

If you have enabled periodic automatic bandwidth adjustment, the periodic automatic bandwidth adjustment parameters (the adjustment interval and the maximum average bandwidth) are not reset after executing the request mpls lsp adjust-autobandwidth command. For more information, see the JUNOS MPLS Applications Configuration Guide.

Required Privilege Level

maintenance