[Contents] [Prev] [Next] [Index] [Report an Error]


show chassis alarms

Syntax

show chassis alarms

Syntax
(routing matrix)

show chassis alarms 
<lcc number | scc>

Description

Display information about the conditions that have been configured to trigger alarms.

Options

none—(Routing matrix only) Display information about the conditions that have been configured to trigger alarms on the TX Matrix platform and its attached T640 routing nodes.

lcc number—(Routing matrix only) (Optional) Show information about a specified T640 routing node that is connected to a TX Matrix platform. number can be 0 through 3.

scc—(Routing matrix only) (Optional) Show information about the TX Matrix platform.

Additional Information

You cannot clear the alarms for chassis components. Instead, you must remedy the cause of the alarm. When a chassis alarm is lit, it indicates that you are running the router in a manner that we do not recommend.

You can manually silence external devices connected to the alarm relay contacts by pressing the alarm cutoff button, located on the craft interface. Silencing the device does not remove the alarm messages from the display (if present on the router) nor extinguish the alarm LEDs. In addition, new alarms that occur after you silence an external device reactivate the external device.

Required Privilege Level

view

List of Sample Output

show chassis alarms (alarms active)
show chassis alarms (no alarms active)
show chassis alarms (alarms active on a routing matrix)

Output Fields

Alarm time—Date and time alarm was first recorded.

Class—Severity class for this alarm. It can be Minor or Major.

Description—Information about the alarm.

show chassis alarms (alarms active)

user@host> show chassis alarms
3 alarms are currently active
Alarm time               Class  Description
2000-02-07 10:12:22 UTC Major fxp0: ethernet link down 
2000-02-07 10:11:54 UTC Minor YELLOW ALARM - PEM 1 Removed 
2000-02-07 10:11:03 UTC Minor YELLOW ALARM - Lower Fan Tray Removed

show chassis alarms (no alarms active)

user@host> show chassis alarms
No alarms are currently active

show chassis alarms (alarms active on a routing matrix)

user@host> show chassis alarms 
scc-re0:
--------------------------------------------------------------------------
8 alarms currently active
Alarm time               Class  Description
2004-08-05 18:43:53 PDT  Minor  LCC 0 Minor Errors
2004-08-05 18:43:53 PDT  Minor  SIB 3 Not Online
2004-08-05 18:43:52 PDT  Major  SIB 2 Absent
2004-08-05 18:43:52 PDT  Major  SIB 1 Absent
2004-08-05 18:43:52 PDT  Major  SIB 0 Absent
2004-08-05 18:43:33 PDT  Major  LCC 2 Major Errors
2004-08-05 18:43:28 PDT  Major  LCC 0 Major Errors
2004-08-05 18:43:05 PDT  Minor  LCC 2 Minor Errors
lcc0-re0:
--------------------------------------------------------------------------
5 alarms currently active
Alarm time               Class  Description
2004-08-05 18:43:53 PDT  Minor  SIB 3 Not Online
2004-08-05 18:43:49 PDT  Major  SIB 2 Absent
2004-08-05 18:43:49 PDT  Major  SIB 1 Absent
2004-08-05 18:43:49 PDT  Major  SIB 0 Absent
2004-08-05 18:43:28 PDT  Major  PEM 0 Not OK

lcc2-re0:
--------------------------------------------------------------------------
5 alarms currently active
Alarm time               Class  Description
2004-08-05 18:43:35 PDT  Minor  SIB 3 Not Online
2004-08-05 18:43:33 PDT  Major  SIB 2 Absent
2004-08-05 18:43:33 PDT  Major  SIB 1 Absent
2004-08-05 18:43:33 PDT  Major  SIB 0 Absent
2004-08-05 18:43:05 PDT  Minor  PEM 1 Absent

[Contents] [Prev] [Next] [Index] [Report an Error]