Index
A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
Symbols
- #, in configuration statements 1
- ( )
- in syntax descriptions 1
- < >, in syntax descriptions 1
- [ ]
- in configuration statements 1
- { }, in configuration statements 1
- |
- in syntax descriptions 1
A
- aggregate-label statement 1
- usage guidelines 1
- all (tracing flag)
- Layer 2 VPNs 1
- VPLS 1
- application-based Layer 3 VPNs 1
- ATM trunking 1
- Layer 2 circuits 1
B
- bandwidth accounting 1
- bandwidth statement
- Layer 2 circuits 1
- usage guidelines 1
- BGP
- route target filtering 1, 2
- examples 1
- BOOTP
- service 1
- BPDU packets, spanning tree 1
- BPDUs, nonstandard 1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
C
- CAC 1
- fast reroute 1
- link and node protection 1
- LSP path protection 1
- secondary paths 1
- call admission control 1, 2
- carrier-of-carriers VPNs
- customer types for 1
- interface configuration 1
- Internet service provider as customer 1
- LDP 1
- overview 1
- standards documents 1
- statistics 1
- VPN service provider as customer 1
- CCC
- encapsulation
- Layer 2 VPNs 1, 2
- Frame Relay, control word 1
- CE devices (routers or switches) 1
- class of service See CoS1
- comments, in configuration statements 1
- community statement
- Layer 2 circuits 1
- usage guidelines 1
- VPNs
- usage guidelines 1
- connections (tracing flag)
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- control word, Frame Relay 1
- control-word statement
- Layer 2 circuits 1
- usage guidelines 1
- Layer 2 VPNs 1
- usage guidelines 1
- conventions, documentation 1
- CoS
- VPNs 1
- curly braces, in configuration statements 1
- customer edge devices or routers See CE devices1
- customer support
- contacting 1
D
- DCU, Layer 3 VPNs 1
- description statement
- Layer 2 circuits 1
- usage guidelines 1
- routing instances for VPNs 1
- usage guidelines 1
- destination-mac-address match condition 1
- detail (tracing flag modifier)
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- disable option to traceoptions command
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- documentation conventions 1
- dynamic-tunnels statement 1
- usage guidelines 1
E
- EBGP
- multihop for Layer 3 VPNs 1
- egress filtering options 1
- encapsulation
- Layer 2 VPNs 1
- logical interfaces 1
- physical interfaces 1
- types 1
- encapsulation statement
- Layer 2 VPNs 1
- usage guidelines 1
- logical interfaces 1
- usage guidelines (CCC) 1
- usage guidelines (TCC) 1
- physical interfaces 1
- usage guidelines (CCC) 1
- usage guidelines (TCC) 1
- VPLS 1
- usage guidelines 1
- end-interface statement 1
- usage guidelines 1
- error (tracing flag)
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- Ethernet switches, VPLS 1
- ether-type match conditions 1
F
- family inet-vpn option 1
- family l2vpn option 1
- family route-target statement 1
- usage guidelines 1
- fast reroute, CAC 1
- FEC (tracing flag) 1
- file option to traceoptions command
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- files option to traceoptions command
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- filter-based forwarding
- Layer 3 VPNs 1
- firewall filters
- Layer 3 VPNs 1
- VPLS 1
- flag option to traceoptions statement
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- forwarding-class match condition 1
G
- graceful restart
- VPNs and VPLS
- configuration 1
- overview 1
- graceful-restart statement
- VPNs and VPLS 1
- usage guidelines 1
- GRE tunnels 1, 2
I
- IBGP
- Layer 3 VPNs 1
- multihop for Layer 3 VPNs 1
- IGP
- shortcuts
- incompatible with VPNs 1
- VPN use of 1
- independent-domain statement
- Layer 3 VPNs 1
- usage guidelines 1
- inet6-vpn statement 1
- usage guidelines 1
- install-nexthop statement 1
- usage guidelines 1
- instance-type statement 1
- usage guidelines 1
- interface statement
- Layer 2 circuits 1
- usage guidelines 1
- VPLS 1
- usage guidelines 1
- VPNs 1
- usage guidelines 1
- interface-group match condition 1
- interfaces
- VPN tunnel (VT) 1
- interface-specific counter for VPLS 1
- interprovider VPNs
- MP-EBGP configuration 1
- multihop MP-EBGP configuration 1
- overview 1, 2
- standards documents 1
- statistics gathering 1
- VRF tables linked between ASs 1
- IPSec
- between PE routers in VPN 1
- IPv6
- Layer 3 VPNs 1
L
- l2circuit statement 1
- labeled-unicast statement
- VPNs 1
- usage guidelines 1
- Layer 2 circuit
- local interface switching 1
- Layer 2 circuits
- ATM trunking 1, 2
- bandwidth accounting 1
- BPDUs 1
- CAC 1
- call admission control 1
- interface configuration 1, 2
- neighbor configuration 1, 2
- ping command 1
- tracing operations 1, 2
- trunk mode 1
- virtual circuit ID 1, 2
- Layer 2 VPNs
- BPDUs 1
- CCC encapsulation 1, 2
- configuration example 1
- encapsulation
- logical interfaces 1
- physical interfaces 1
- types 1, 2
- graceful restart
- configuration 1
- overview 1
- hub-and-spoke topology 1
- IBGP session between PE routers 1
- instance type 1, 2
- overview 1
- ping command 1
- policer 1
- proxy statement to configure a TCC 1
- remote statement to configure a TCC 1
- remote-site-id statement
- usage guidelines 1
- route distinguisher 1, 2
- site configuration 1, 2
- TCC encapsulation 1
- tracing operations 1, 2
- Layer 2.5 VPNs 1
- Layer 3 VPNs
- application-based 1
- DCU 1
- egress filtering options 1
- example configurations 1
- filter-based forwarding 1
- firewall filters 1
- graceful restart
- configuration 1
- overview 1
- GRE tunnels 1
- IBGP
- enabling transit of traffic 1
- establishing session between PE routers 1
- import policy 1, 2
- instance type 1, 2
- interface configuration 1
- IPv6 configuration 1
- loopback interface 1
- multicast
- configuration 1
- overview 1
- multihop EBGP and IBGP 1
- OSPF
- configuring version 2 1
- configuring version 3 1
- domain ID 1
- sham link configuration 1
- sham link example 1
- sham links overview 1
- overview 1
- ping command 1
- route distinguisher 1, 2
- SCU 1
- site of origin 1
- target VPN 1
- VPN of origin 1
- LDP
- VPN signaling 1
- link and node protection, CAC 1
- local interface switching 1
- local-switching statement 1
- usage guidelines 1
- logical routers
- VPNs 1
- loopback interface
- logical unit on, for VRF routing instance 1
M
- mac-table-size statement 1
- usage guidelines 1
- match conditions
- destination-mac-address 1
- ether-type 1
- forwarding-class 1
- interface-group 1
- source-mac-address 1
- vlan-ether-type 1
- metric statement
- OSPF 1
- usage guidelines 1
- MPLS
- IGP shortcuts and VPNs 1
- mtu statement 1
- usage guidelines 1
- multicast
- Layer 3 VPNs
- configuration 1
- overview 1
- multihop EBGP and IBGP 1
- multihop statement
- Layer 3 VPNs 1
- usage guidelines 1
- multipath statement
- Layer 3 VPNs 1
- usage guidelines 1
N
- neighbor statement
- Layer 2 circuits 1
- usage guidelines 1
- nlri (tracing flag)
- Layer 2 VPNs 1
- VPLS 1
- no-control-word statement
- Layer 2 circuits 1
- usage guidelines 1
- Layer 2 VPNs 1
- usage guidelines 1
- nonstandard BPDUs 1
- normal TTL decrementing for VPNs 1
- no-stamp option to traceoptions statement
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
O
- OSPF
- domain ID
- configuration 1
- example 1
- Layer 3 VPNs 1
- sham links
- configuration 1
- example 1
- overview 1
- overlapping VPNs 1
P
- P routers 1
- path MTU check, VPNs 1
- PE routers 1
- IPSec 1
- per-group-label statement 1
- usage guidelines 1
- ping command
- usage guidelines
- Layer 2 circuits 1
- VPNs 1
- policer statement
- Layer 2 VPNs 1
- usage guidelines 1
- policers
- Layer 2 VPNs 1, 2
- VPLS 1
- protect-interface statement 1
- usage guidelines 1
- provider edge routers See PE routers1
- provider routers See P routers1
- proxy statement 1
- usage guidelines 1
R
- remote statement 1
- usage guidelines 1
- remote-site-id statement 1
- usage guidelines 1
- replace option to traceoptions statement
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- resolve-vpn statement
- VPNs 1
- rewrite markers, VPNs 1
- route (tracing flag)
- Layer 2 VPNs 1
- VPLS 1
- route distinguisher 1, 2
- route limit, configuring 1
- route origin 1
- route target filtering, BGP 1, 2
- route-distinguisher statement 1
- usage guidelines 1
- route-distinguisher-id statement 1
- usage guidelines 1
- routing instances
- configuring for VPNs 1
- virtual-router 1
- RSVP
- enabling for VPN signaling 1
S
- SCU, Layer 3 VPNs 1
- sham links
- configuration 1
- example 1
- sham-link statement
- Layer 3 VPNs 1
- usage guidelines 1
- sham-link-remote statement 1
- usage guidelines 1
- site configuration
- Layer 2 VPNs 1, 2
- VPLS 1, 2
- site of origin
- attribute of Layer 3 VPNs 1
- configuration 1
- site statement
- Layer 2 VPNs 1
- usage guidelines 1
- VPLS 1
- usage guidelines 1
- site-identifier statement
- Layer 2 VPNs 1
- usage guidelines 1
- VPLS 1
- usage guidelines 1
- site-range statement 1
- usage guidelines 1
- size option to traceoptions statement
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- source-mac-address match condition 1
- Spanning Tree Protocol and VPLS 1
- statistics
- VPLS filter for collecting 1
- support, technical
- customer support, contacting 1
T
- target VPN (attribute of Layer 3 VPN) 1
- TCC
- encapsulation
- Layer 2 VPNs 1
- technical support
- customer support, contacting 1
- topology (tracing flag)
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- traceoptions statement
- Layer 2 circuits 1
- usage guidelines 1
- Layer 2 VPNs 1
- usage guidelines 1
- VPLS 1
- usage guidelines 1
- traceroute command
- Layer 3 VPNs 1
- tracing flag modifiers
- detail
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- tracing flags
- all
- Layer 2 VPNs 1
- VPLS 1
- connections
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- error
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- FEC 1
- Layer 2 circuits 1
- Layer 2 VPNs 1
- nlri
- Layer 2 VPNs 1
- VPLS 1
- route
- Layer 2 VPNs 1
- VPLS 1
- topology
- Layer 2 circuits 1
- Layer 2 VPNs 1
- VPLS 1
- VPLS 1
- tracing operations
- Layer 2 circuits 1, 2
- Layer 2 VPNs 1, 2
- VPLS 1, 2
- traffic-statistics statement
- VPNs 1
- usage guidelines 1
- trunk mode 1
- TTL decrementing
- VPNs 1
- tunnel-services statement 1
- usage guidelines 1
- typefaces, documentation conventions 1
V
- virtual-circuit-id statement 1
- usage guidelines 1
- virtual-router routing instances
- configuration 1
- interfaces 1
- overview 1
- vlan-ether-type match condition 1
- vlan-id statement
- VPLS 1
- usage guidelines 1
- vlan-tagging statement
- VPLS 1
- usage guidelines 1
- VPLS
- BPDU frames 1
- Ethernet switches 1
- filter for collecting statistics 1
- filters 1
- actions 1
- flood traffic 1
- FTFs 1
- interfaces 1
- interface-specific counters 1
- match conditions 1
- routing instances 1
- flood filters 1
- graceful restart
- configuration 1
- overview 1
- hardware support 1
- IBGP session between PE routers 1
- instance type 1, 2
- interfaces 1
- interface-specific counter 1
- MAC address table 1
- overview 1
- PIC support 1
- policers 1, 2
- site configuration 1, 2
- STP (Spanning Tree Protocol) 1
- tracing operations 1, 2
- VT interfaces, specifying 1
- vpls statement 1
- usage guidelines 1
- VPN of origin (attribute of Layer 3 VPN) 1
- VPN tunnels
- for egress filtering 1
- for VRF table lookup 1
- vpn-apply-export statement 1
- usage guidelines 1
- vpn-group-address statement 1
- usage guidelines 1
- VPNs
- CE devices 1
- CoS 1
- export policy 1, 2
- IGP 1
- IGP shortcuts 1
- interfaces 1
- LDP, enabling 1
- logical routers 1
- multiple instance LDP 1
- overlapping 1
- P routers 1
- packet forwarding 1
- path MTU check 1
- PE routers 1
- rewrite markers 1
- routing instances 1
- path MTU check 1
- RSVP, enabling 1
- signaling protocols, enabling 1
- unicast RPF 1
- See also carrier-of-carriers VPNs; interprovider VPNs; Layer 2 VPNs; Layer 3 VPNs; VPNs, Layer 2; VPNs, Layer 31
- VRF table lookups 1
- vrf-export statement 1
- usage guidelines 1
- vrf-import statement 1
- usage guidelines 1
- vrf-mtu-check statement 1
- usage guidelines 1
- vrf-table-label statement 1
- usage guidelines 1
- vrf-target statement 1
- usage guidelines 1
- VT interfaces
- VPLS 1
- VTs See VPN tunnels1
W
- world-readable option to traceoptions statement
- Layer 2 circuits 1
- VPLS 1