request mpls lsp adjust-autobandwidth

Syntax

request mpls lsp adjust-autobandwidth <lsp-name> <logical-router-name>

Description

Manually trigger a bandwidth allocation adjustment for active LSP paths. If you do not specify an LSP or a logical router, all the LSPs on the router will have their bandwidth allocation adjusted.

To use this command, the following must be true:

• Automatic bandwidth allocating must be enabled on the LSP.
• The criteria required to trigger a bandwidth adjustment have been met (the difference between the adjust bandwidth and the current LSP path bandwidth is greater than the threshold limit).

If you have enabled periodic automatic bandwidth adjustment, the periodic automatic bandwidth adjustment parameters (the adjustment interval and the maximum average bandwidth) are not reset after executing the request mpls lsp adjust-autobandwidth command.

Options

logical-router-name—(Optional) Name of the logical router on which you want to trigger the bandwidth allocation adjustment.

lsp-name—(Optional) Name of the LSP on which you want to trigger the bandwidth allocation adjustment.

Required Privilege Level

maintenance

See Also

JUNOS MPLS Applications Configuration Guide