aggregate

Syntax

(aggregate | no-aggregate); 

Hierarchy Level

[edit logical-routers logical-router-name protocols rsvp interface interface-name],

[edit logical-routers logical-router-name protocols rsvp peer-interface 
peer-interface-name],

[edit protocols rsvp interface interface-name],

[edit protocols rsvp peer-interface peer-interface-name]

Description

Control the use of RSVP aggregate messages on an interface or peer interface:

• aggregate—Use RSVP aggregate messages.
• no-aggregate—Do not use RSVP aggregate messages.

Aggregate messages can pack multiple RSVP messages into a single transmission, thereby reducing network overhead and enhancing efficiency. The number of supportable sessions and processing overhead are significantly improved when aggregation is enabled.

Not all routers connected to a subnet need to support aggregation simultaneously. Each RSVP router negotiates its intention to use aggregate messages on a per-neighbor basis. Only when both routers agree are aggregate messages sent.

Default

Aggregation is disabled.

Usage Guidelines

See Configuring RSVP Refresh Reduction.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.