Configure the Interface Address

To configure the logical address for the MLPPP bundle, include the address statement:

address address {

...

}

You can configure this statement at the following hierarchy levels:

• [edit interfaces interface-name unit logical-unit-number family inet]
• [edit logical-routers logical-router-name interfaces interface-name unit logical-unit-number family inet]

Assign an IP address to the interface by configuring the address value. The AS PIC supports only IPv4 addresses configured using the family inet statement.

For information on other addressing properties you can configure that are not specific to service interfaces, see the JUNOS Network Interfaces and Class of Service Configuration Guide.