Enable Flow Collection Mode and Interface

You can select the Monitoring Services PIC to run in either flow collection mode or monitoring mode, but not both.

To set the Monitoring Services PIC to run in flow collection mode, include the flow-collector statement at the [edit chassis fpc slot-number pic pic-number monitoring-services application] hierarchy level:

[edit chassis fpc slot-number pic pic-number monitoring-services application]

flow-collector;

For further information on configuring chassis properties, see the JUNOS System Basics Configuration Guide.

To specify flow collection interfaces, you configure the cp interface at the [edit interfaces] hierarchy level:

[edit interfaces]

cp-fpc/pic/port {

...

}