Configure SNMPv3

To configure SNMPv3, include the following statements at the [edit snmp v3] and [edit snmp] hierarchy levels:

[edit snmp]

engine-id {

    (local engine-id | use-fxp0-mac-address | use-default-ip-address);

view view-name; {

    oid object-identifier (include | exclude);

[edit snmp v3]

notify name {

    tag tag-name;

    type trap;

notify-filter profile-name {

    oid object-identifier (include | exclude);

snmp-community community-index {

    community-name community-name;

    security-name security-name;

      tag tag-name;

target-address target-address-name {

    address address;

     address-mask address-mask;

    port <port-number>;

    tag-list [ tag-list ];

     target-parameters target-parameters-name;

target-parameters target-parameters-name {

    notify-filter profile-name;

    parameters {

        message-processing-model (v1 | v2c | v3);

        security-model (usm | v1 | v2c);

        security-level (authentication | none | privacy);

        security-name security-name;

    }

}

usm {

    local-engine {

        user username {

            authentication-md5 {

                 authentication-password authentication-password;

            authentication-sha {

                authentication-password authentication-password;

            authentication-none;

            privacy-3des {

                privacy-password privacy-password;

            }

            privacy-aes128 {

                privacy-password privacy-password;

            }

            privacy-des {

                privacy-password privacy-password;

            }

            privacy-none;

vacm {

    access {

        group group-name {

            default-context-prefix {

                security-model (any | usm | v1 | v2c) {

                    security-level (authentication | none | privacy) {

                        notify-view view-name;

                        read-view view-name;

                        write-view view-name;

                }

            }

    security-to-group {

        security-model (usm | v1 | v2c) {

            security-name security-name {

                group group-name;

This section includes the following topics for configuring SNMPv3: