Configure TCC Encapsulation on Interfaces

Also known as Layer 2.5 VPNs, the translation cross-connect (TCC) encapsulation types allow you to configure different encapsulation types at the ingress and egress of a Layer 2 VPN or the ingress and egress of a Layer 2 circuit. For example, a CE router at the ingress of a Layer 2 VPN path can send traffic in a Frame Relay encapsulation. A CE router at the egress of that path can receive the traffic in an ATM encapsulation.

For information on how to configure encapsulations for Layer 2 circuits, see Configure the Interface Encapsulation Type for Layer 2 Circuits.

The configuration for TCC encapsulation types is similar to the configuration for CCC encapsulation types. For Layer 2 VPNs, you specify a TCC encapsulation type for each PE-router-to-CE-router interface. The encapsulation type configured for the interface should match the encapsulation type configured under the routing instance. See Configure the Encapsulation Type for information about how to configure the encapsulation type under the routing instance.

To configure the TCC encapsulation type, include the following statements:

interfaces {

    interface name {

        encapsulation tcc-encapsulation-type;

        unit unit number {

            encapsulation tcc-encapsulation-type;

        }

    }

}

You can configure these statements at the following hierarchy levels:

• [edit interfaces interface-name unit logical-unit-number]
• [edit logical-routers logical-router-name interfaces interface-name unit logical-unit-number]

You configure the encapsulation type at the [edit interfaces] hierarchy level differently from the [edit routing-instance] hierarchy level. For example, you specify the encapsulation as frame-relay at the [edit routing-instances] hierarchy level and as frame-relay-tcc at the [edit interfaces] hierarchy level.

For Layer 2.5 VPNs employing an Ethernet interface as the TCC router, you can configure an Ethernet translational cross-connect (TCC) or an extended VLAN TCC.

To configure an Ethernet TCC or an extended VLAN TCC, include the proxy and remote statements:

proxy {

    inet-address address;

}

remote {

    (inet-address | mac-address) address;

}

You can configure these statements at the following hierarchy levels:

• [edit interfaces interface-name unit logical-unit-number family tcc]
• [edit logical-interfaces logical-interface-name interfaces interface-name unit logical-unit-number family tcc]

The proxy inet-address address statement defines the IP address for which the TCC router is proxying.

The remote (inet-address | mac-address) statement defines the location of the remote router.

Ethernet TCC is supported on interfaces that carry IPv4 traffic only. Ethernet TCC encapsulation is supported on 1-port Gigabit Ethernet, 2-port Gigabit Ethernet, 4-port Gigabit Ethernet, and 4-port Fast Ethernet PICs only. Ethernet TCC is not supported on the T640 routing node.

For more information on how to configure interfaces and interface encapsulations, see the JUNOS Internet Software Configuration Guide: Network Interfaces and Class of Service.