Install a Static Route into More than One Routing Table

You can install a static route into more than one routing table. For example, you might want a simple configuration that allows you to install a static route into the default routing table inet.0, as well as a second routing table inet.2. Instead of configuring the same static route for each routing table, you can use routing table groups to insert the route into multiple tables. To create a routing table group, include the rib-group statement.

For a list of hierarchy levels at which you can configure this statement, see the statement summary section for this statement.

To install the routing table into a configured routing table group, include the import-rib statement:

rib-group group-name {

    import-rib [ routing-table-names ]

}

For a list of hierarchy levels at which you can configure this statement, see the statement summary section for this statement.

The first routing table you list in the import-rib statement must be the one you configured in the rib-group statement.

Examples: Install a Static Route into More than One Routing Table

Install an IPv4 static route into inet.0 and inet.2:

[edit routing-options rib table1.inet.0 static] 

rib-group groupA; 

[edit routing-options rib-groups]

groupA {

    import-rib [table1.inet.0 inet.0 inet.2]

}

Install an IPv6 static route into the inet6.0 and inet6.2 routing tables:

[edit routing-options rib table1.inet6.0 static] 

rib-group groupA; 

[edit routing-options rib-groups]

groupA {

    import-rib [table1.inet6.0 inet6.0 inet6.2]

}