options

Syntax

options {
    syslog (level level | upto level);
}

Hierarchy Level

[edit routing-options],
[edit routing-instances routing-instance-name routing-options],
[edit logical-routers logical-router-name routing-options],
[edit logical-routers logical-router-name routing-instances routing-instance-name routing-options]

Description

Configure the types of system logging messages sent about the routing protocols process to the system message logging file. These messages are also displayed on the system console. You can log messages at a particular level, or up to and including a particular level.

Options

level level—Severity of the message. It can be one or more of the following levels, in order of decreasing urgency:

• emergency—Panic or other conditions that cause the system to become unusable
• alert—Conditions that should be corrected immediately, such as a corrupted system database
• critical—Critical conditions, such as hard drive errors
• error—Standard error conditions
• warning—System warning messages
• notice—Conditions that are not error conditions, but that might warrant special handling
• info—Informational messages
• debug—Software debugging messages

Default: info

upto level—Log all messages up to a particular level.

Usage Guidelines

See Configure Logging for the Routing Protocol Process.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.

See Also

syslog in the JUNOS Internet Software Configuration Guide: Getting Started