accept-data

Syntax

(accept-data | no-accept-data);

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family inet address address
vrrp-group group-number],
[edit logical-routers logical-router-name interfaces interface-name unit logical-unit-number family inet address address vrrp-group group-number]

Description

When configuring Virtual Router Redundancy Protocol (VRRP) on Fast Ethernet and Gigabit Ethernet interfaces, configure whether an interface accepts packets destined for the virtual IP address:

• accept-data—Allow the interface to accept packets destined for the virtual IP address.
• no-accept-data—Prohibit the interface from accepting packets destined for the virtual IP address.

Default

If the accept-data statement is not configured, the master router responds to ICMP message requests only.

        Usage Guidelines

See Accept Packets Destined for the Virtual IP Address.

Required Privilege Level

interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.