rpf-check

Syntax

rpf-check <fail-filter filter-name>;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family family],
[edit logical-routers logical-router-name interfaces interface-name unit logical-unit-number family family]

Description

Check whether traffic is arriving on an expected path. You can configure this statement with the inet or inet6 protocol family only.

Options

fail-filter—A filter to evaluate when packets are received on the interface. If the RPF check fails, this optional filter is evaluated.

Usage Guidelines

See Configure Unicast RPF Strict Mode.

Required Privilege Level

interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.