Disable the Removal of Address and Control Bytes

For PPP CCC-encapsulated interfaces, the address and control bytes are removed by default before the packet is encapsulated into a tunnel.

You can disable the removal of address and control bytes. To do this, include the keep-address-and-control statement:

keep-address-and-control;

You can configure this statement at the following hierarchy levels:

• [edit interfaces interface-name unit logical-unit-number family ccc]
• [edit logical-routers logical-router-name interfaces interface-name unit logical-unit-number family ccc]

When you use PPP CCC encapsulation, and one PE router is running JUNOS software Release 5.7 or earlier and the other PE router is running JUNOS software Release 6.0 or later, you must include the keep-address-and-control statement in the configuration of the PE router running JUNOS software Release 6.0 or later.