Juniper Networks Enterprise-Specific SNMP Version 2 Traps

The JUNOS software supports the enterprise-specific version 2 traps shown in Table 8. The traps are organized first by trap category and then by trap name. The system logging severity levels are listed for those traps that have them. For traps that do not have corresponding system logging severity levels, the cell in the table is marked with an
em-dash (—).

For more information about system messages, see the JUNOS Internet Software System Log Messages Reference. For more information about configuring system logging, see the JUNOS Internet Software Configuration Guide: Getting Started.

Table 8: Enterprise-Specific Supported SNMP Version 2 Traps

Trap Category	Trap Name	snmpTrapOID	System Logging Severity Level	System Log Tag
chassis	`jnxFanFailure`	1.3.6.1.4.1.2636.4.1.2	critical	CHASSISD_SNMP_TRAP
chassis	`jnxFanOK`	1.3.6.1.4.1.2636.4.2.2	critical	CHASSISD_SNMP_TRAP
chassis	`jnxFruInsertion`	1.3.6.1.4.1.2636.4.1.6	notice	CHASSISD_SNMP_TRAP
chassis	jnxFruPowerOff	1.3.6.1.4.1.2636.4.1.7	notice	CHASSISD_SNMP_TRAP
chassis	`jnxFruPowerOn`	1.3.6.1.4.1.2636.4.1.8	notice	CHASSISD_SNMP_TRAP
chassis	`jnxFruRemoval`	1.3.6.1.4.1.2636.4.1.5	notice	CHASSISD_SNMP_TRAP
chassis	`jnxOverTemperature`	1.3.6.1.4.1.2636.4.1.3	critical	CHASSISD_SNMP_TRAP
chassis	`jnxPowerSupplyFailure`	1.3.6.1.4.1.2636.4.1.1	alert	CHASSISD_SNMP_TRAP
chassis	`jnxPowerSupplyOK`	1.3.6.1.4.1.2636.4.2.1	critical	CHASSISD_SNMP_TRAP
chassis	`jnxRedundancySwitchOver`	1.3.6.1.4.1.2636.4.1.4	critical	CHASSISD_SNMP_TRAP
chassis	`jnxTemperatureOK`	1.3.6.1.4.1.2636.4.2.3	alert	CHASSISD_SNMP_TRAP
cfgmgmt	`jnxCmCfgChange`	1.3.6.1.4.1.2636.4.5.0.1	—	—
ldp	`jnxLdpLspUp`	1.3.6.1.4.1.2626.4.4.0.1	—	—
ldp	`jnxLdpLspDown`	1.3.6.1.4.1.2626.4.4.0.2	—	—
ldp	`jnxLdpSesUp`	1.3.6.1.4.1.2626.4.4.0.3	—	—
ldp	`jnxLdpSesDown`	1.3.6.1.4.1.2626.4.4.0.4	—	—
pmon	jnxPMonOverloadSet	1.3.6.1.4.1.2636.4.7.0.1	—	—
pmon	jnxPMonOverloadCleared	1.3.6.1.4.1.2636.4.7.0.2	—	—
rmon-alarms	`jnxrisingAlarm`	1.3.6.1.1.2.1.16.0.1	—	—
rmon-alarm	`jnxfallingAlarm`	1.3.1.2.1.16.0.2	—	—
rmon-alarm	`jnxRmonAlarmGetFailure`	1.3.6.1.4.1.1.2636.4.3.0.1	—	—
rmon-alarm	`jnxRmonGetOk`	1.3.6.1.4.1.2636.4.3.0.2	—	—
routing	`jnxLdpLspDown`	1.3.6.1.4.1.2636.4.4.0.2	—	—
routing	`jnxLdpLspUp`	1.3.6.1.4.1.2636.4.4.0.1	—	—
routing	`jnxMplsLspUp`	1.3.6.1.4.1.2636.3.2.4.1	—	—
routing	`jnxMplsLspDown`	1.3.6.1.4.1.2636.3.2.4.2	—	—
routing	`jnxMplsLspChange`	1.3.6.1.4.1.2636.3.2.4.3	—	—
sonet	`jnxSonetAlarmSet`	1.3.6.1.4.1.2636.4.6.0.1	—	—
sonet	`jnxSonetAlarmCleared`	1.3.6.1.4.1.2636.4.6.0.2	—	—
sonetaps	apsEventSwitchover	1.3.6.1.4.1.2636.3.24.2.0.1	—	—
sonetaps	apsEventModeMismatch	1.3.6.1.4.1.2636.3.24.2.0.2	—	—
sonetaps	apsEventChannelMismatch	1.3.6.1.4.1.2636.3.24.2.0.3	—	—
sonetaps	apsEventPSBF	1.3.6.1.4.1.2636.3.24.2.0.4	—	—
sonetaps	apsEventFEPLF	1.3.6.1.4.1.2636.3.24.2.0.5	—	—

The sections that follow provide the Juniper Networks enterprise-specific MIBs for the SNMPv2 traps defined in Table 8, including: