Juniper Networks Enterprise-Specific MIBs

The JUNOS software supports the following enterprise-specific MIBs:

• ATM COS MIB— provides support for monitoring ATM2 VC COS configurations. It also provides COS queue statistics for all VCs which have COS configured. For a downloadable version of this MIB, see www.juniper.net/software/junos/junos56/
swconfig56-net-mgmt/html/mib-jnx-atm-cos.txt
• ATM MIB—Provides support for ATM interfaces and virtual connections. For a downloadable version of this MIB, see www.juniper.net/techpubs
/software/junos/junos56/swconfig56-net-mgmt/html/mib-jnx-atm.txt.
• Alarm MIB—Provides support for alarms from the router. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/
swconfig56-net-mgmt/html/mib-jnx-chassis-alarm.txt.
• Chassis MIB—Provides support for environmental monitoring (power supply state, board voltages, fans, temperatures, air flow) and inventory support for the chassis, SCB, SSB, SFM, FPCs, and PICs. For more information about the chassis MIB, see Interpret the Chassis MIB. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/swconfig56-net-mgmt/
html/mib-jnx-chassis.txt.
• Class of Service MIB—Provides support for monitoring interface output queue statistics per interface and per forwarding class. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/swconfig56-net-mgmt/
html/mib-jnx-cos.txt.
• Configuration Management MIB—Provides notification for configuration changes as SNMP traps. Each trap contains the time at which the configuration change was committed, the user who made the change, and the method by which the change was made. A history of the last 32 configuration changes is kept in jnxCmChgEventTable. For a downloadable version of this MIB, see www.juniper.net/techpubs/software
/junos/junos56/swconfig56-net-mgmt/html/mib-jnx-cfgmgmt.txt.
• Destination Class Usage MIB—Provides support for monitoring packet counts based on the ingress and egress points for traffic transiting your networks. Ingress points are identified by input interface. Egress points are identified by destination prefixes grouped into one or more sets, known as destination classes. One counter is managed per interface per destination class, up to a maximum of 16 counters per interface. For information about the destination class usage MIB, see Interpret the Destination Class Usage MIB. For a downloadable version of this MIB, see www.juniper.net/
techpubs/software/junos/junos56/swconfig56-net-mgmt/html/mib-jnx-dcu.txt.
• Firewall MIB—Provides support for monitoring firewall filter counters. Routers must have the Internet Processor II ASIC to perform firewall monitoring. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56
/swconfig56-net-mgmt/html/mib-jnx-firewall.txt.
• Interface MIB—Extends standard ifTable (RFC 2863) with additional statistics and Juniper Networks enterprise-specific chassis information. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/
swconfig55-net-mgmt/html/mib-jnx-if-extensions.txt.
• IPv4 MIB—Provides additional IPv4 address information, supporting the assignment of identical IPv4 addresses to separate interfaces. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/swconfig56-net-mgmt/
html/mib-jnx-ipv4.txt.
• IPv6 and ICMPv6 MIB—Provides IPv6 and ICMPv6 statistics. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/
swconfig56-net-mgmt/html/mib-jnx-ipv6.txt.
• LDP MIB—Defines LDP LSP notifications. LDP traps only support IPv4 standards. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/
junos56/swconfig56-net-mgmt/html/mib-jnx-ldp.txt.
• MPLS MIB—Provides MPLS information and defines MPLS notifications. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/
junos56/swconfig56-net-mgmt/html/mib-jnx-mpl.txt.
• Passive Montioring MIB—Performs traffic flow monitoring and lawful interception of packets transiting between two routers. For more information about the passive monitoring MIB, see JUNOS Internet Software Feature Guide and Interpret the Passive Monitoring MIB. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/swconfig56-net-mgmt
/html/mib-jnx-pmon.txt.
• Ping MIB— Extends the standard ping MIB control table (RFC 2925). Items in this MIB are created when entries are created in pingCtlTable of the ping MIB. Each item is indexed exactly as it is in the ping MIB. For more information about the ping MIB, see Interpret the Ping MIB. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/swconfig56-net-mgmt/html/
mib-jnx-ping.txt.
• RMON Events and Alarms MIB—Supports the JUNOS extensions to the standard RMON events and alarms MIB (RFC 2819). The extension augments alarmTable with additional information about each alarm. Two new traps are also defined to indicate when problems are encountered with an alarm. For more information about the RMON events and alarms MIB, see Interpret the RMON Events and Alarms MIB. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/
junos56/swconfig56-net-mgmt/html/mib-jnx-rmon.txt.
• Reverse Path Forwarding MIB—Monitors statistics for traffic that is rejected because of reverse path forwarding (RPF) processing. For more information about the reverse path forwarding MIB, see Interpret the Reverse Path Forwarding MIB. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/
junos56/swconfig56-net-mgmt/html/mib-jnx-rpf.txt.
• SONET/SDH Interface Management MIB—Monitors the current alarm for each SONET/SDH interface. For a downloadable version of this MIB, see www.juniper.net/
techpubs/software/junos/junos56/swconfig56-net-mgmt/html/mib-jnx-sonet.txt.
• Source Class Usage MIB—Counts packets sent to customers by performing a lookup on the IP source address and the IP destination address. SCU makes it possible to track traffic originating from specific prefixes on the provider core and destined for specific prefixes on the customer edge. For more information about the source class usage MIB, see Interpret the Source Class Usage MIB. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/
swconfig56-net-mgmt/html/mib-jnx-scu.txt.
• Structure of Management Information (SMI) MIB—Explains how the Juniper Networks enterprise-specific MIBs are structured. For a downloadable version of this MIB, see www.juniper.net/techpubs/software/junos/junos56/swconfig56-net-mgmt/html/
mib-jnx-smi.txt.
• Traceroute MIB—Supports the JUNOS extensions of traceroutes and remote operations. Items in this MIB are created when entries are created in the traceRouteCtlTable of the traceroute MIB. Each item is indexed exactly the same way as it is in the traceroute MIB. For more information about the traceroute MIB, see Interpret the Traceroute MIB. For a downloadable version of this MIB, see www.juniper.net/techpubs
/software/junos/junos56/swconfig56-net-mgmt/html/mib-jnx-traceroute.txt.