Table of Contents
- About This Manual
- Objectives
- Audience
- Document Organization
- Part Organization
- Using the Indexes
- Documentation Conventions
- General Conventions
- Conventions for Software Commands and Statements
- List of Technical Publications
- Documentation Feedback
- How to Request Support
- IP Multicast Overview
- IP Multicast Standards
- Multicast Overview
- Multicast Addresses
- Complete Multicast Configuration Statements
- [edit protocols] Hierarchy Level
- [edit routing-instances] Hierarchy Level
- [edit routing-options] Hierarchy Level
- IGMP Overview
- IGMP Standards
- IGMP Configuration Guidelines
- Minimum IGMP Configuration
- Enable IGMP
- Modify the IGMP Host-Query Message Interval
- Modify the IGMP Query Response Interval
- Modify the Last-Member Query Interval
- Modify the Robustness Variable
- Change the IGMP Version
- Enable IGMP Static Group Membership
- Example: IGMP Static Group Membership
- Trace IGMP Protocol Traffic
- Example: Trace IGMP Protocol Traffic
- Disable IGMP
- Summary of IGMP Configuration Statements
- disable
- group
- igmp
- interface
- query-interval
- query-last-member-interval
- query-response-interval
- robust-count
- source
- static
- traceoptions
- version
- MLD Overview
- MLD Standards
- MLD Operation
- MLD Configuration Guidelines
- Minimum MLD Configuration
- Enable MLD
- Modify the MLD Host-Query Message Interval
- Modify the MLD Query Response Interval
- Modify the Last-Member Query Interval
- Modify the Robustness Variable
- Enable MLD Static Group Membership
- Example: MLD Static Group Membership
- Trace MLD Protocol Traffic
- Example: Trace MLD Protocol Traffic
- Disable MLD
- Summary of MLD Configuration Statements
- disable
- group
- interface
- mld
- query-interval
- query-last-member-interval
- query-response-interval
- robust-count
- source
- static
- traceoptions
- SAP and SDP Overview
- SAP and SDP Standards
- SAP and SDP Configuration Statements
- Summary of SAP and SDP Multicast Configuration Statements
- disable
- listen
- sap
- Multicast Administrative Scoping
- Multicast Scoping Overview
- Multicast Scoping Standards
- Example: Configure Multicast Scoping
- Multicast Scoping Configuration Statement
- scope
- Source-Specific Multicast
- Source-Specific Multicast Groups Overview
- Source-Specific Multicast Groups Standards
- Example: Configure an SSM-Only Domain
- Example: Configure PIM-SSM on a Network
- Enable IGMPv3 on all Host-Facing Interfaces
- Display the IGMP State
- Display the PIM State
- Source-Specific Multicast Groups Statement
- ssm-groups
- DVMRP Overview
- DVMRP Standards
- DVMRP Configuration Guidelines
- Minimum DVMRP Configuration
- Create Routing Tables for DVMRP Routes
- Enable DVMRP
- Modify the DVMRP Hold-Time Period
- Modify the Metric Value
- Disable DVMRP on an Interface
- Configure DVMRP Routing Policy
- Configure DVMRP Routing Modes
- Trace DVMRP Protocol Traffic
- Configuration Examples
- Example: Trace DVMRP Protocol Traffic
- Example: Configure DVMRP
- Example: Configure DVMRP to Announce Unicast Routes
- Summary of DVMRP Configuration Statements
- disable
- dvmrp
- export
- hold-time
- import
- interface
- metric
- mode
- rib-group
- traceoptions
- PIM Overview
- PIM Standards
- PIM Modes
- PIM Sparse Mode
- Designated Router
- Rendezvous Point
- RP Mapping Options
- Static Configuration
- Auto-RP
- Bootstrap Router
- Building an RPT between RP and Receivers
- PIM-SM Source Registration
- PIM-SM Shortest Path Tree (SPT) Cutover
- PIM-SSM
- PIM Dense Mode
- PIM Sparse-Dense Mode
- RP Mapping Using Anycast RP
- Multicast Over Layer 3 VPNs
- Tunnel PICs and Multicast
- Fast Ethernet PIC
- Filtering
- PIM Configuration Guidelines
- Configure PIM Mode-Independent Properties
- Change the PIM Version
- Configure a PIM RPF Routing Table
- Filter PIM Join Messages
- Configure the Designated Router Priority
- Modify the Hello Interval
- Configure PIM Trace Options
- Configure PIM Dense Mode Properties
- Minimum PIM Dense Mode Configuration
- Enable PIM Dense Mode
- Configure PIM Sparse Mode Properties
- Minimum PIM Sparse Mode Configuration
- Enable PIM Sparse Mode
- Configure the Router's Local RP Properties
- Configure the IP Protocol Family
- Configure the Local RP Address
- Configure the Router's RP Priority
- Configure the Groups for Which the Router Is the RP
- Modify the Local RP Hold Time
- Configure Static RPs
- Configure Bootstrap Properties
- Configure the Router's Bootstrap Router Priority
- Filter PIM Bootstrap Messages
- Configure Auto-RP Announcement and Discovery
- Configure Sparse-Dense Mode Properties
- Configure Multicast for Layer 3 VPNs
- Configure the VPN
- Configure Multicast Connectivity between the Provider and PE Routers
- Configure Multicast Connectivity on the CE Routers
- Configure Multicast Connectivity for the VPN on the PE Router
- Configure the Routing Group
- Configuration Examples
- Example: Configure PIM Dense Mode
- Example: Configure PIM Sparse Mode
- Configure the RP Router
- Configure All Non-RP Routers
- Example: Configure Sparse-Dense Mode
- Example: Configure Anycast RP
- Configure the RP Router
- Configure All Non-RP Routers
- Example: Configure PIM BSR Filters
- Example: Configure PIM Join Filters
- Example: Configure Border Routers with Externally-Facing Interfaces
- Example: Trace PIM Protocol Traffic
- Example: Reject PIM Bootstrap Messages at the Boundary of a PIM Domain
- Example: Configure PIM-SM Multicast Over Layer 3 VPNs
- Configure PIM on the Provider (P) Router
- Configure PIM on the Provider Edge 1 (PE1) Router
- Configure PIM on the PE2 Router
- Configure PIM on the Customer Edge 1 (CE1) Router
- Configure PIM on the CE2 Router
- Configure the Routing Instance on the PE1 Router
- Configure the Routing Instance on the PE2 Router
- Configure the Routing Table Group
- Example: Configure PIM-DM Support for Multicast over Layer 3 VPNs
- Configure PIM on the P Router
- Configure PIM on the PE Router
- Configure PIM on the CE Router
- Configure the Routing Instance on the PE Router
- Example: Configure PIM-Sparse-Dense Support for Multicast over Layer 3 VPNs
- Configure PIM on the (P) Router
- Configure PIM on the PE Router
- Configure PIM on the CE Router
- Configure the Routing Instance on the PE Router
- Summary of PIM Configuration Statements
- address
- address (static RPs)
- address (local RPs)
- auto-rp
- bootstrap-export
- bootstrap-import
- bootstrap-priority
- dense-groups
- disable
- family
- group-ranges
- hello-interval
- hold-time
- import
- interface
- local
- mode
- pim
- priority
- priority (PIM interfaces)
- priority (PIM RPs)
- rib-group
- rp
- static
- traceoptions
- version
- vpn-group-address
- MSDP Overview
- MSDP Standards
- MSDP Configuration Guidelines
- Minimum MSDP Configuration
- Enable MSDP
- Configure MSDP Peers
- Configure MSDP Groups
- Configure MSDP Mesh Groups
- Configure MSDP Routing Policy
- Configure Multiple Rendezvous Points in a Domain
- Example: Configure a Router to Use Anycast RP
- Disable MSDP
- Trace MSDP Protocol Traffic
- Example: Trace MSDP Protocol Traffic
- Example: Configure MSDP
- Summary of MSDP Configuration Statements
- disable
- export
- group
- import
- local-address
- mode
- msdp
- peer
- rib-group
- traceoptions
- Glossary
- Index
- Index of Statements and Commands