List of Tables

Table 1:    Juniper Networks Technical Documentation

Table 2:    Statements for Physical Interface Properties

Table 3:    Media MTU Sizes by Interface Type for M5, M10, M20, and M40 Routers     

Table 4:    Media MTU Sizes by Interface Type for M40e Routers

Table 5:    Media MTU Sizes by Interface Type for M160 Routers

Table 6:    Media MTU Sizes by Interface Type for T320 Platforms

Table 7:    Media MTU Sizes by Interface Type for T640 Platforms

Table 8:    Encapsulation Overhead by Encapsulation Type

Table 9:    BERT Capabilities by Interface Type

Table 10:    Statements for Logical Interface Properties

Table 11:    ATM 1 and ATM 2 Configuration Differences

Table 12:    ATM 1 Traffic-Shaping Rates

Table 13:    Supported Interfaces on Channelized PICs with QPP

Table 14:    Frame Relay DLCI Limitations for Channelized Interfaces

Table 15:    Clocking Capabilities by Channelized PIC Type

Table 16:    Structural Differences: Original Channelized PICs and Channelized PICs with QPP    

Table 17:    Ranges for Channelized E1 Configuration

Table 18:    OC-12 to DS-3 Numbering Scheme

Table 19:    Channelized STM-1 to E1 Channel Mapping

Table 20:    Ranges for Channelized DS-3 to DS-0 Configuration

Table 21:    VLAN ID Range by Interface Type

Table 22:    Multilink and Link Services Logical Interface Statements

Table 23:    Link Services Physical Interface Statements

Table 24:    Multilink Services PIC Capacities

Table 25:    Link Services Bundle

Table 26:    SONET/SDH Framing Bytes for Specific Speeds

Table 27:    SONET Default Settings

Table 28:    Default IP Precedence Classifier

Table 29:    CoS Hardware Capabilities and Limitations

Table 30:    Default DSCP Mappings

Table 31:    Default Forwarding Classes

Table 32:    Default Behavior Aggregate Classification

Table 33:    Default Packet Header Rewrite Mappings