bert-error-rate

Syntax

bert-error-rate rate;

Hierarchy Level

[edit interfaces interface-name ds0-options],
[edit interfaces interface-name e1-options],
[edit interfaces interface-name e3-options],
[edit interfaces interface-name t1-options],
[edit interfaces interface-name t3-options]

Description

Configure the bit error rate to use in a BERT procedure. Applies to E1, E3, T1, or T3 interfaces, and also to the channelized interfaces (DS-3, OC-3, OC-12, STM-1).

Options

rate—Bit error rate.
Range: 0 through 7, which corresponds to 10^-0 (that is, 1 error per bit) to 10^-7 (that is, 1 error per 10 million bits)
Default: 0

Usage Guidelines

See Configure BERT Properties, Configure E3 BERT Properties, Configure T1 BERT Properties, Configure T3 BERT Properties, and Examples: Configure T3 Interfaces.

Required Privilege Level

interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.

See Also

bert-algorithm, bert-period