vci

Syntax

vci vpi-identifier.vci-identifier;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number],
[edit interfaces interface-name unit logical-unit-number family family address address
multipoint-destination address]

Description

For ATM point-to-point logical interfaces only, configure the virtual circuit identifier (VCI) and virtual path identifier (VPI).

To configure a VPI for a point-to-multipoint interface, specify the VPI in the multipoint-destination statement.

Options

vci-identifier—ATM virtual circuit identifier. Unless you configure the interface to use promiscuous mode, this value cannot exceed the largest numbered VC configured for the interface with the maximum-vcs option of the vpi statement.
Range: 0 through 4089 or 0 through 65,535 with promiscuous mode

vpi-identifier—ATM virtual path identifier.
Range: 0 through 255
Default: 0

Usage Guidelines

See Configure a Point-to-Point ATM 1 or ATM 2 Connection.

Required Privilege Level

interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.

See Also

multipoint-destination, promiscuous-mode, vpi