atm-encapsulation

Syntax

atm-encapsulation (direct | PLCP);

Hierarchy

[edit interfaces at-fpc/pic/port e3-options]
[edit interfaces at-fpc/pic/port t3-options]

Description

Configure encapsulation for E3/T3 traffic over ATM interfaces.

Default

PLCP is the default value for T3 traffic and for E3 traffic using G.751 framing.

Options

direct—Use direct encapsulation. G.832 framing on E3 interfaces requires direct encapsulation.

PLCP—Use PLCP encapsulation.

Usage Guidelines

See Configure E3 and T3 Parameters on ATM 1 Interfaces.

Required Privilege Level

interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.

See Also

eui-64