partition

Syntax

partition partition-number oc-slice oc-slice-range interface-type type timeslots time-slot-range;

Hierarchy Level

[edit interfaces interface-name]

Description

For Q Performance Processor (QPP) interfaces only, configure the channelized interface partition. The partition number correlates with the channel number. Partition and, therefore, channel numbering on QPP interfaces begins with :1, not :0.

Default

If you omit this statement, the Channelized PIC with QPP is not partitioned, and no data channels are configured.

Options

partition-number—Sublevel interface partition index.

Ranges:

• 1 through 4 for an OC-3 interface on a Channelized OC-12 QPP interface.
• 1 through 12 for a T3 interface on a Channelized OC-12 QPP interface.
• 1 through 4 for a a T3 interface on a Channelized T3 QPP interface.
• 1 through 28 for a T1 QPP interface on a Channelized OC-12 QPP or Channelized T3 QPP interface.
• 1 through 10 for an E1 interface on a Channelized E1 QPP interface.
• 1 through 24 for NxDS0 interfaces on either channelized OC-12 QPP or channelized DS3 QPP interfaces.
• 0 through 31(with 0 reserved for framing) for NxDS0 interfaces on channelized E1 QPP interfaces.

The remaining statements are explained separately.

Usage Guidelines

See Configure Channelized E1 Interfaces, Configure Channelized OC-12 Interfaces, and Configure Channelized T3 Interfaces.

Required Privilege Level

interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.

See Also

no-partition