Configure Channelized STM-1 Interfaces

You can configure up to 63 E1 channels per single-port Channelized STM-1 to E1 PIC. To specify the channel number, include it after the colon (:) in the interface name. For example, a Channelized STM-1 to E1 PIC in FPC 1 and slot 1 will have the following physical interface, depending on the media type:

e1-1/1/0:x

The E1 channel number can be from 0 through 62.

This chapter is organized as follows:

• Configure Channelized STM-1 Interface Properties
• Virtual Tributary Mapping of Channelized STM-1 Interface
• Example: Configure Channelized STM-1 Interfaces