Configure CCC Encapsulation on the Interfaces

You need to specify a circuit cross-connect (CCC) encapsulation type for each PE-router-to-CE-router interface running in the Layer 2 VPN. This encapsulation type should match the encapsulation type configured under the routing instance.

Configure the following CCC encapsulation types for the interfaces on Router A:

[edit]

interfaces {

    interface so-6/0/0.0 {

        encapsulation frame-relay-ccc;

        unit 0 {

            encapsulation frame-relay-ccc;

        }

    }

    interface so-6/0/0.1 {

        encapsulation frame-relay-ccc;

        unit 1 {

            encapsulation frame-relay-ccc;

        }

    }

}

Configure the following CCC encapsulation types for the interfaces on Router B:

[edit]

interfaces {

    interface so-6/0/0.2 {

        encapsulation frame-relay-ccc;

        unit 2 {

            encapsulation frame-relay-ccc;

        }

    }

    interface so-6/0/0.3 {

        encapsulation frame-relay-ccc;

        unit 3 {

            encapsulation frame-relay-ccc;

        }

    }

}

Configure the following CCC encapsulation types for the interfaces on Router C:

[edit]

interfaces {

    interface so-6/0/0.4 {

        encapsulation frame-relay-ccc;

        unit 4 {

            encapsulation frame-relay-ccc;

        }

    }

    interface so-6/0/0.5 {

        encapsulation frame-relay-ccc;

        unit 5 {

            encapsulation frame-relay-ccc;

        }

    }

}