bandwidth

Syntax

bandwidth bps;

Hierarchy Level

[edit protocols rsvp interface interface-name ]

Description

For certain logical interfaces (such as ATM, PVC or frame relay), you cannot determine the correct bandwidth from the hardware. This statement allows you to specify the actual available bandwidth.

Default

The hardware raw bandwidth is used.

Options

bps—Bandwidth is specified in bits per second. You can specify this as an integer value (if you do so, count your zeros carefully, or you can use the abbreviations k (for a thousand), m (for a million), or g (for a billion [also called a thousand million]).
Range: Any positive integer
Default: 0 (no bandwidth is reserved)

Usage Guidelines

See Reserve Bandwidth on an Interface.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.