bandwidth

Syntax

bandwidth bps ;

Hierarchy Level

[edit protocols mpls],
[edit protocols mpls label-switched-path lsp-path-name ],
[edit protocols mpls label-switched-path lsp-path-name (primary | secondary) path-name ],
[edit protocols mpls label-switched-path lsp-path-name fast-reroute]

Description

When configuring an LSP, specify the traffic rate associated with the LSP.

When configuring fast reroute, allocate bandwidth for the reroute path. By default, no bandwidth is reserved for the rerouted path. The fast reroute bandwidth does not need to be identical to that allocated for the LSP itself.

Options

bps—Bandwidth specified in bits per second. You can specify this as an integer value (if you do so, count your zeros carefully, or you can use the abbreviations k (for a thousand), m (for a million), or g (for a billion [also called a thousand million]).
Range: Any positive integer
Default: 0 (no bandwidth is reserved)

Usage Guidelines

See Configure Fast Reroute and Configure the Path Bandwidth.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.