class-of-service

Syntax

class-of-service cos-value ;

Hierarchy Level

[edit protocols mpls],
[edit protocols mpls label-switched-path lsp-path-name ],
[edit protocols mpls label-switched-path lsp-path-name (primary | secondary) path-name ],
[edit protocols mpls interface interface-name label-map in-label ],
[edit protocols mpls static-path inet address ]

Description

CoS value given to all packets in the LSP.

The CoS value might affect the scheduling or queuing algorithm of traffic traveling along an LSP.

Options

cos-value—CoS value. A higher value typically corresponds to a higher level of service.
Range—0 through 7
Default—If you do not specify a CoS value, the IP precedence bits from the packet's IP header are used as the packet's CoS value.

Usage Guidelines

See Configure the MPLS CoS Value, Configure the Ingress Router for Static MPLS, and Configure the Intermediate and Egress Routers for Static MPLS.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.