A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
Symbols
- #, in configuration statements 1
- ( )
- in syntax descriptions 1
- < >, in syntax descriptions 1
- [ ]
- in configuration statements 1
- { }, in configuration statements 1
- | (pipe)
- in syntax descriptions 1
A
- actions
- routing policy actions 1
- active routes 1, 2, 3
- active statement 1
- static routes, usage guidelines 1
- address entries 1
- address statement 1
- configured tunnel 1
- advertise-inactive statement 1
- usage guidelines 1
- aggregator path attribute See BGP, aggregator path attribute1
- aggregator statement 1
- static routes, usage guidelines 1
- alert (system logging severity level) 1
- all (tracing flag) 1
- all tracing flag
- RIPng 1, 2
- allow statement 1
- usage guidelines 1
- alternate preferences 1
- always-compare-med option 1, 2
- as-override statement
- BGP 1
- as-path (tracing flag) 1
- as-path statement
- aggregate routes 1
- generated routes 1
- static routes 1
- usage guidelines 1
- ASs
- configuring 1, 2, 3
- description 1
- paths 1
- generated routes 1, 2
- operations, tracing 1
- static routes 1, 2
- private, removing 1, 2
- atomic-aggregate statement 1
- static routes, usage guidelines 1
- authentication
- BGP 1
- HMAC-MD5, IS-IS 1
- IS-IS 1
- MD5
- BGP 1
- simple
- IS-IS 1
- authentication-key statement
- BGP 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1, 2
- authentication-type statement
- IS-IS 1
- usage guidelines 1
- autonomous statement
- neighbor discovery 1
- usage guidelines 1
- autonomous systems See ASs1
- autonomous-system statement 1
- usage guidelines 1, 2, 3, 4
B
- BGP
- aggregator path attribute 1, 2
- AS numbers, peers 1
- ASs See ASs1
- authentication 1, 2, 3
- autonomous system override 1
- communities
- names 1
- static routes 1
- confederations 1, 2, 3
- configuration statements 1, 2, 3
- description 1
- enabling on router 1, 2
- external (EBGP) 1
- flap damping See damping1
- groups 1, 2
- hold time 1, 2, 3
- identifier 1, 2
- internal (IBGP) 1
- IP address 1
- IPSec 1, 2
- keepalive messages 1, 2
- local address 1, 2
- local preference attribute 1, 2
- local-as 1
- MBGP 1, 2
- MED 1, 2
- messages 1, 2
- multihop sessions 1
- multipath configuration 1
- multiple exit discriminator See BGP, MED1
- neighbors See BGP, peers1
- next hop 1, 2
- NLRI 1, 2
- nondeterministic path selection 1
- notification messages 1
- open messages 1, 2, 3, 4
- overview 1
- packets, tracing 1
- passive mode 1
- path attributes 1, 2
- peer groups See BGP, groups1
- peers 1, 2, 3, 4
- policy, routing 1, 2, 3
- preferences 1, 2, 3
- route reflection 1, 2, 3
- router identifier 1, 2
- routes 1
- routing table groups 1
- routing tables
- delays in exchanging routes 1, 2
- nonactive routes 1, 2
- retaining routes 1
- set local AS number 1
- standards supported 1
- syslog messages 1
- TCP and 1
- tracing operations 1, 2, 3
- type, group 1
- update messages 1, 2
- version supported 1
- BGP prefix-limit 1
- bgp statement 1
- Border Gateway Protocol See BGP1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
C
- channel part of interface name 1
- cisco-non-deterministic option 1, 2
- clear ipv6 router-advertisement command 1, 2, 3
- clear neighbors ipv6 command 1
- clear router-advertisement ipv6 command 1
- client peers, BGP 1
- clock sources 1
- clocking statement
- usage guidelines 1
- cluster statement 1
- usage guidelines 1
- clusters, BGP 1
- color statement
- aggregate routes 1
- generated routes 1
- static routes 1
- usage guidelines 1, 2, 3
- comments, in configuration statements 1
- communities
- names 1
- static routes 1
- community statement
- aggregate routes 1
- static routes 1
- usage guidelines 1
- complete sequence number PDUs
See IS-IS, complete sequence number PDUs1- confederation statement 1
- usage guidelines 1, 2
- confederations 1, 2, 3
- config-internal (tracing flag) 1
- configuration mode, CLI
- statement hierarchy 1
- configuration tunnel
- example configuration 1
- configured tunnel
- configuration guidelines 1
- standards supported 1
- statement summary 1
- conventions, documentation 1
- critical (system logging severity level) 1
- csn (tracing flag) 1
- csnp-interval statement 1
- usage guidelines 1
- curly braces, in configuration statements 1
- current-hop-limit statement
- neighbor discovery 1
- usage guidelines 1
- customer support
- contacting 1
D
- damping 1, 2, 3
- damping (tracing flag) 1
- damping statement
- BGP 1
- usage guidelines 1
- debug (system logging severity level) 1
- default-lifetime statement
- neighbor discovery 1
- usage guidelines 1
- defaults statement
- static statement 1
- description statement 1, 2
- usage guidelines 1, 2
- descriptors, interface 1
- designated router
- IS-IS 1
- destination statement 1
- configured tunnel 1
- detail (tracing flag modifier) 1
- disable statement
- BGP 1
- IS-IS 1
- usage guidelines 1
- discard routes 1
- discard statement 1
- in static statement 1
- usage guidelines 1
- documentation conventions 1
E
- EBGP See BGP1
- emergency (system logging severity level) 1
- end system 1
- equal-cost paths 1, 2
- error (tracing flag)
- IS-IS 1
- RIPng 1, 2
- error logging severity 1
- Ethernet interfaces
- internal Ethernet interface 1
- eui-64 statement 1
- usage guidelines 1
- event (tracing flag) 1
- expiration (tracing flag) 1, 2
- export statement
- BGP 1
- usage guidelines 1
- IS-IS 1
- OSPF
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- export-rib statement 1
- usage guidelines 1, 2, 3
- external-preference statement
- IS-IS 1
- usage guidelines 1
F
- family descriptors 1
- family statement 1
- configured tunnel 1
- usage guidelines 1
- filter statement 1
- firewall
- IPv6 filters 1
- flash (tracing flag) 1
- forwarding table
- overview 1
- static routes 1, 2, 3, 4
- synchronizing 1
- from statement 1
G
- general (tracing flag) 1
- RIPng 1, 2
- graceful-restart statement 1, 2
- usage guidelines 1, 2
- group statement
- BGP
- usage guidelines 1, 2
- RIPng 1
- usage guidelines 1
- groups See BGP, groups1
H
- header
- fields 1
- hello (tracing flag)
- IS-IS 1
- hello packets
- IS-IS 1
- hello-authentication-key statement 1
- hello-authentication-type statement 1
- usage guidelines 1
- hello-interval statement 1
- IS-IS
- usage guidelines 1
- HMAC-MD5 authentication 1
- HMAC-MD5 authentication
See also MD5 authentication1- holddown (tracing flag) 1, 2
- hold-time statement
- BGP 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
I
- IBGP See BGP1
- identifiers
- BGP See BGP, identifier1
- router See router identifier1
- import statement
- BGP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- import-policy statement 1
- usage guidelines 1
- import-rib statement 1
- usage guidelines 1, 2, 3
- indirect (tracing flag) 1
- inet protocol family
- on logical interfaces 1
- inet.0 routing table 1
- inet.3 routing table 1
- inet6.0 routing table 1
- info (system logging severity level) 1
- install statement 1
- usage guidelines 1
- interface
- ipv6 1
- interface addresses
- preferred interface addresses 1, 2
- interface statement
- IS-IS
- usage guidelines 1, 2
- neighbor discovery 1
- usage guidelines 1
- OSPF
- usage guidelines 1
- interface-routes statement 1
- usage guidelines 1, 2, 3
- interfaces
- clock sources 1
- configuration statements 1, 2
- descriptive text 1
- descriptors 1
- display order in configurations 1
- interface types supported 1
- names 1, 2, 3
- permanent interfaces 1, 2
- transient interfaces 1, 2
- interfaces statement 1
- configured tunnel 1
- usage guidelines 1
- intermediate system 1
- internal Ethernet interface 1
- ipsec-sa statement
- BGP 1
- usage guidelines 1
- IPv6
- addressing 1
- representation 1
- scope 1
- structure 1
- types 1
- advantages 1
- clear neighbors 1
- clear router-advertisement 1
- show interface terse 1
- show ipv6 neighbors 1
- show ripng statistics command 1
- show route protocol ripng 1
- show route receive-protocol 1
- show route table inet6.0 1
- show router-advertisement 1
- standards documents 1
- system show connection 1
- transition 1
- configured tunnel 1
- dual stack 1
- IS-IS
- addresses 1
- areas 1, 2
- authentication 1, 2, 3, 4, 5, 6
- complete sequence number PDUs 1, 2, 3, 4, 5
- configuration statements 1, 2
- configuring 1, 2
- cost See IS-IS, metrics1, 2
- designated router 1, 2
- disabling 1, 2, 3
- enabling 1, 2, 3
- end system 1
- errored packets 1
- errored PDUs 1
- graceful restart 1, 2
- hello
- interval 1, 2
- packet authentication 1, 2
- packet authentication key 1
- PDUs 1, 2, 3
- hold time 1, 2
- interfaces 1, 2
- intermediate system 1
- Level 1 1
- Level 2 1
- level properties 1
- link-state PDUs See IS-IS, LSPs1
- LSPs 1, 2, 3
- errored 1
- generation 1
- interval 1, 2, 3
- lifetime 1, 2
- tracing 1
- mesh groups 1, 2, 3
- metrics 1, 2, 3, 4
- normal 1
- traffic engineering 1
- wide 1, 2
- metrics, wide 1
- NET 1
- network PDUs 1
- NSAP 1
- overloaded, marking router as 1, 2
- packets See IS-IS, PDUs1
- partial sequence number PDUs 1, 2, 3
- PDUs 1
- policy, routing 1, 2
- preferences 1, 2, 3, 4, 5
- protocol data units See IS-IS, PDUs1
- rib-group 1
- route cost See IS-IS, metrics1
- route cost See OSPF, metrics1
- routing domains 1, 2
- shortest-path-first calculations 1, 2
- SPF delay 1
- standards supported 1
- TLVs 1
- tracing operations 1, 2
- traffic engineering support 1, 2, 3
- wide metrics 1
- isis statement 1
- usage guidelines 1
- ISO
- addresses 1
- system identifier (sysid) 1
- ISOprotocol family 1
K
- keep statement 1
- usage guidelines 1
- keepalive (tracing flag)
- BGP 1
- keepalive messages 1
- kernel (tracing flag) 1
L
- Level 1 1
- Level 2 1
- level statement 1, 2
- usage guidelines 1
- link-state PDUs See IS-IS, LSPs1
- load sharing 1
- local-address statement
- BGP 1
- usage guidelines 1
- local-as statement 1
- usage guidelines 1
- local-preference statement 1
- usage guidelines 1
- logging
- routing protocol process 1, 2
- logical interfaces
- descriptors 1
- interface identifier 1
- preferred interface addresses 1, 2
- primary interface addresses 1
- protocol families 1
- unit numbers 1
- logical part of interface name 1
- log-updown statement 1
- usage guidelines 1
- lsp (tracing flag) 1
- lsp-generation (tracing flag) 1
- lsp-interval statement 1
- usage guidelines 1
- lsp-lifetime statement 1
- usage guidelines 1
- LSPs See IS-IS, LSPs; LSPs, MPLS1
M
- managed-configuration statement
- neighbor discovery 1
- usage guidelines 1
- management Ethernet interface
- overview 1
- martian addresses 1, 2
- martians statement 1
- match conditions
- routing policies 1
- max-advertisement-interval statement
- neighbor discovery 1
- usage guidelines 1
- maximum-routes statement 1
- MBGP 1, 2
- MD5 authentication
- BGP 1
- See also HMAC-MD5 authentication1
- MED See BGP, multiple exit discriminator1
- mesh groups 1, 2
- mesh-group statement 1
- usage guidelines 1
- metric statement
- aggregate routes 1
- generated routes 1
- IS-IS 1
- usage guidelines 1
- static routes 1
- usage guidelines 1
- metric-in statement
- RIPng 1
- usage guidelines 1
- metric-out statement
- BGP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- metrics
- aggregate routes 1
- BGP 1
- generated routes 1
- IS-IS 1, 2, 3, 4
- RIPng 1, 2
- static routes 1, 2
- MIB 1
- min-advertisement-interval statement
- neighbor discovery 1
- usage guidelines 1
- MPLS
- mpls protocol family 1
- mtu statement 1, 2
- multihop statement 1
- usage guidelines 1
- multipath statement 1
- usage guidelines 1
- multiple active routes 1
- multiprotocol BGP (MBGP) 1, 2
N
- names
- interface names 1, 2, 3
- neighbor discovery
- autoconfiguration 1
- autonomous 1
- basics 1
- configuration statements 1, 2
- enabling 1
- hop limit 1
- neighbor solicitation
- frequency 1
- onlink 1
- preferred lifetime 1
- prefix information 1
- reachable time 1
- router advertisement
- frequency 1
- router advertisements 1
- router lifetime 1
- show command 1, 2
- standards documents 1
- valid lifetime 1
- neighbor statement
- BGP
- usage guidelines 1, 2, 3
- RIPng 1
- usage guidelines 1
- neighbors
- BGP 1
- ipv6 1
- RIPng 1
- NET 1
- network entity title See IS-IS, NET1
- network layer reachability information
See BGP, NLRI1- network PDUs 1
- network protocol data units
See IS-IS, network PDUs1- network service access point 1
- next hop
- BGP 1, 2
- next-hop statement 1, 2
- usage guidelines 1, 2
- next-table statement 1
- NLRI, BGP 1, 2
- no-advertise statement 1
- static routes, usage guidelines 1
- no-aggregator-id statement 1
- usage guidelines 1
- no-authentication-check statement 1
- usage guidelines 1
- no-autonomous statement
- usage guidelines 1
- no-client-reflect statement 1
- usage guidelines 1
- no-export statement 1
- static routes, usage guidelines 1
- no-export-subconfed statement 1
- static routes, usage guidelines 1
- no-install statement 1
- usage guidelines 1
- no-managed-configuration statement
- usage guidelines 1
- nonclient peers, BGP 1
- no-on-link statement
- usage guidelines 1
- no-other-stateful-configuration statement
- usage guidelines 1
- no-readvertise statement 1
- usage guidelines 1
- no-retain statement 1
- usage guidelines 1
- normal (tracing flag) 1
- RIPng 1, 2
- notice (system logging severity level) 1
- notification messages, BGP 1
- NPDUs See IS-IS, network PDUs1
- NSAP 1
O
- on-link statement
- neighbor discovery 1
- usage guidelines 1
- open (tracing flag) 1
- open messages, BGP 1
- options statement 1
- usage guidelines 1
- OSPF
- router identifier 1
- other-stateful-configuration statement
- neighbor discovery 1
- usage guidelines 1
- out-delay statement 1
- usage guidelines 1
- overload statement 1
- usage guidelines 1
P
- packets (tracing flag)
- BGP 1
- IS-IS 1
- RIPng 1, 2
- parse (tracing flag) 1
- partial sequence number PDUs See IS-IS,
partial sequence number PDUs1- passive statement
- aggregate routes 1
- BGP 1
- usage guidelines 1
- generated routes 1
- IS-IS 1
- usage guidelines 1
- static routes 1
- usage guidelines 1
- path attributes, BGP 1, 2, 3
- path-selection statement 1
- usage guidelines 1
- peer groups See BGP, groups1
- peer-as statement 1
- usage guidelines 1
- peers See neighbors1
- permanent interfaces 1, 2
- physical interfaces
- clock sources 1
- descriptive text 1, 2
- descriptors 1
- interface name 1
- physical part of interface name 1
- point-to-point interface 1
- policy
- overview 1
- policy (tracing flag) 1
- RIPng 1, 2
- policy, routing
- actions 1
- BGP 1, 2, 3
- configuring 1
- IS-IS 1, 2
- match conditions 1
- overview 1
- precedence 1
- prefix list 1
- RIPng 1, 2, 3
- policy-options statement 1
- policy-statement statement 1
- preference statement
- aggregate routes 1
- BGP 1
- usage guidelines 1
- generated routes 1
- IS-IS 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- static routes 1
- usage guidelines 1, 2, 3
- preferences
- active routes 1, 2
- aggregate routes 1
- alternate preferences 1
- BGP 1
- default preferences 1
- generated routes 1
- IS-IS 1, 2, 3, 4
- modifying
- with configuration statements 1, 2
- overview 1
- static routes 1, 2, 3, 4
- tie-breaker preferences 1
- preferred interface addresses 1, 2
- preferred statement 1, 2
- usage guidelines 1, 2
- preferred-lifetime statement
- neighbor discovery 1
- usage guidelines 1
- prefix list 1
- prefix statement
- neighbor discovery 1
- prefix-limit statement
- usage guidelines 1
- prefix-list statement
- policy, routing 1
- primary interface addresses 1
- primary routing tables 1
- primary statement 1, 2
- usage guidelines 1
- priority statement
- IS-IS 1
- usage guidelines 1
- protocol data units See IS-IS, PDUs 1251, 2
- protocol families
- logical interfaces 1
- protocol statement 1
- usage guidelines 1
- protocols
- protocol-related statistics 1
- psn (tracing flag) 1
- PSNP See IS-IS, partial sequence number PDUs1
Q
- qualified-next-hop
- static routes 1
- qualified-next-hop statement
- static routes 1, 2
- static statement 1
R
- reachable-time statement
- neighbor discovery 1
- usage guidelines 1
- readvertise statement 1
- usage guidelines 1
- receive routes 1
- receive statement
- RIPng 1
- usage guidelines 1, 2
- static routes 1
- usage guidelines 1
- receive tracing flag modifier 1
- redirected routes 1
- reference-bandwidth statement 1
- usage guidelines 1
- regex-parse (tracing flag) 1
- reject routes 1
- reject statement
- static routes
- usage guidelines 1
- static statement 1
- remove-private statement 1
- usage guidelines 1
- request (tracing flag) 1, 2
- resolution statement
- routing options 1
- resolve
- static routes 1
- resolve statement 1
- usage guidelines 1
- retain statement 1
- usage guidelines 1
- retransmit-timer statement
- neighbor discovery 1
- usage guidelines 1
- rib statement 1
- usage guidelines 1, 2, 3
- rib-group statement
- routing options 1, 2, 3
- usage guidelines 1, 2, 3
- static routes
- usage guidelines 1
- usage guidelines 1, 2
- rib-groups statement 1
- usage guidelines 1, 2, 3
- RIPng
- configuration statements 1, 2, 3
- enabling 1, 2
- groups 1
- metrics 1, 2
- neighbors 1, 2
- overview 1
- packets 1
- policy, routing 1, 2, 3, 4
- preferences 1, 2
- standards documents 1, 2
- tracing operations 1
- UDP, use of 1
- update messages 1, 2
- ripng statement 1
- usage guidelines 1
- route (tracing flag)
- RIPng 1, 2
- routing 1
- route limit
- configuring 1
- route limit, configure 1
- route reflection, BGP 1
- route resolution
- configuring 1
- route statement
- static statement 1
- router identifier 1, 2
- router neighbor
- ipv6 1
- router-advertisement
- ipv6 1, 2
- router-advertisement statement
- usage guidelines 1
- router-id statement 1
- usage guidelines 1, 2
- routes
- active 1
- Routing Information Protocol Next-Generation
See RIP1- routing protocol databases 1
- routing table groups See routing tables, groups1
- routing tables
- BGP, delays in exchanging routes 1
- creating 1, 2
- groups 1, 2, 3, 4, 5
- import policy 1
- inet.0 1
- inet.3 1
- inet6.0 1
- names 1
- nonactive routes, exchanging with BGP 1, 2
- overview 1
- primary 1
- secondary 1
- synchronizing 1
- routing-instances statement
- usage guidelines 1
- routing-options statement 1
S
- secondary routing tables 1
- send (tracing flag modifier) 1
- send statement
- RIPng 1
- usage guidelines 1, 2
- separators, in interface names 1
- show interface terse command 1
- show ipv6 neighbors command 1, 2, 3
- show ripng statistics 1
- show route forwarding-table command 1
- show route protocol ripng command 1
- show route receive-protocol command 1
- show route table inet6.0 command 1
- show router-advertisement ipv6 command 1
- show system connections 1
- show system statistics command 1
- snmp
- IPv6 1
- snmp statement 1
- source statement 1
- configured tunnel 1
- SPF 1
- spf (tracing flag)
- IS-IS 1
- spf-delay statement 1
- usage guidelines 1
- state (tracing flag)
- global 1
- RIPng 1, 2
- static route options 1
- static routes 1, 2
- preferences 1
- static statement
- static routes 1
- usage guidelines 1
- support, technical
- customer support, contacting 1
- synchronizing routing information 1
- sysid See ISO addresses, sysid1
- syslog messages, routing protocol process 1, 2
- syslog statement 1
- usage guidelines 1
- system identifier See ISO addresses, sysid1
T
- task (tracing flag) 1
- RIPng 1, 2
- technical support
- customer support, contacting 1
- te-metric statement 1
- usage guidelines 1
- then statement
- policy, routing 1
- tie-breaker preferences 1
- timer (tracing flag) 1
- RIPng 1, 2
- tnp protocol family
- on logical interfaces 1
- to statement
- policy, routing 1
- traceoptions statement
- BGP 1
- usage guidelines 1
- global 1, 2
- usage guidelines 1, 2
- IS-IS 1
- usage guidelines 1
- neighbor discovery
- usage guidelines 1
- RIPng 1, 2
- usage guidelines 1
- tracing flags
- all 1
- RIPng 1, 2
- as-path 1
- config-internal 1
- csn 1
- damping 1
- error
- IS-IS 1
- RIPng 1, 2
- event 1
- expiration 1, 2
- flash 1
- general 1
- RIPng 1, 2
- hello
- IS-IS 1
- holddown 1, 2
- indirect 1
- keepalive
- BGP 1
- kernel 1
- lsp 1
- lsp-generation 1
- modifiers
- detail 1
- receive 1
- send 1
- normal 1
- RIPng 1, 2
- open 1
- packets
- BGP 1
- IS-IS 1
- RIPng 1, 2
- parse 1
- policy 1
- RIPng 1, 2
- psn 1
- regex-parse 1
- request 1, 2
- route
- RIPng 1, 2
- routing 1
- spf
- IS-IS 1
- state 1
- RIPng 1, 2
- task 1
- RIPng 1, 2
- timer 1
- RIPng 1, 2
- trigger 1, 2
- update
- BGP 1
- RIPng 1, 2
- tracing operations
- BGP 1, 2
- global 1
- IS-IS 1, 2
- RIPng 1, 2, 3
- routing protocols 1
- traffic engineering
- IS-IS support 1
- transient interfaces 1, 2
- trigger (tracing flag) 1, 2
- ttl statement 1
- tunnel statement
- configured tunnel 1
- type statement
- BGP 1
- usage guidelines 1
- typefaces, documentation conventions 1
U
- unit numbers 1
- unit statement
- configured tunnel 1
- logical interfaces 1
- usage guidelines 1
- update (tracing flag)
- BGP 1
- RIPng 1, 2
- update messages
- BGP 1
- RIPng 1
V
- valid-lifetime statement
- neighbor discovery 1
- usage guidelines 1
W
- warning (system logging severity level) 1
- wide-metrics-only statement 1
- usage guidelines 1