[
Contents ]
[
Prev ]
[
Next ]
[
Index ]
[
Report an Error ]
Configuring an IKE Policy—Quick Configuration (Standard
VPNs)
You can use J-Web Quick Configuration to quickly
configure an IKE policy, authentication, and to reference a proposal. (For information about configuring IKE policies using
the CLI editor or the standard J-Web configuration pages (not Quick Configuration pages), see Configuring an IKE Policy (Standard and Dynamic VPNs) .)
Before You Begin
For background information, read
Figure 55 shows the quick
configuration page where you can select an existing policy, or click Add to create a new one.
Figure 55: IKE Policy Configuration
Figure 56 shows the IKE Policy,
Authentication, and Proposal Configuration page.
Figure 56: IKE Policy, Authentication, and Proposal
Configuration
To configure an IKE policy with Quick Configuration:
Select Configure>IPSec VPN>IKE .
Select IKE Policy tab if it is not
selected.
To use an existing policy, select it from among those
listed and click one of the following buttons:
To apply the configuration and stay on the Quick Configuration
page, click Apply .
To apply the configuration and return to the main Configuration
page, click OK .
To cancel your entries and return to the main page, click Cancel .
To configure a new IKE policy, authentication, and to
reference a proposal, click Add .
Figure 56 shows the quick
configuration page where you create a new IKE policy.
Fill in the options as described in Table 110 .
Click one of the following buttons:
To apply the configuration, click OK .
To cancel the configuration and return to the main Configuration
page, click Cancel .
Table 110: IKE Policy, Authentication,
and Proposal Options
Field
Function
Action
IKE Policy
Name
Name of the policy.
Enter a name.
Descripton
Descripton of the policy.
Enter a description.
Mode
Use Main or Aggressive mode.
Select a mode.
Pre shared key
Use one of the following preshared key types:
Click Pre shared key , click the type of
key, and enter the key in the appropriate format.
Certificate
Use certificates
Click Certificate .
Local Certificate
Use a particular certificate when the local device has multiple
loaded certificates.
Enter a local certificate identifier.
Peer Certificate Type
Use a preferred type of certificate (PKCS7 or X509).
Select a certificate type.
Trusted CA
Use a trusted certificate authority.
Click None or Use all , or click Ca index and select from the list.
Proposal
None
Do not use proposals
Click None .
Predefined
Use one of the following types of predefined Phase 1 proposals:
Basic
Compatible
Standard
Click Predefined and select a proposal
type.
User Defined
Use a user-defined Phase 1 Proposal.
Click User Defined , select a proposal from
the pop-up menu, and click Add .
Contents ]
[
Prev ]
[
Next ]
[
Index ]
[
Report an Error ]
