[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring the TCP-Reset Parameter

When the TCP-RST feature is enabled, the system sends a TCP segment with the RESET flag set when traffic arrives that does not match an existing session and does not have the SYNchronize flag set.

Before You Begin

For background information, read Understanding Security Zones.

To configure the TCP-Reset parameter for the zone ABC, use either J-Web configuration or the CLI configuration editor.

This topic covers:

J-Web Configuration

To configure the TCP-Reset parameter for the zone ABC using the J-Web configuration editor:

  1. Select Configuration>View and Edit>Edit Configuration.

    The Configuration page appears.

  2. Next to Security, click Configure or Edit.
  3. Next to Zones, click Configure or Edit.
  4. Next to Security zone, click Add new entry.
  5. In the Name box, type ABC.
  6. To set the parameter for the ABC zone, select the Tcp rst check box and click OK.
  7. If you are finished configuring the device, commit the configuration.

CLI Configuration

To set the parameter for the zone ABC, enter the following statement in configure mode:

user@host# set security zones security-zone ABC tcp-rst

If you are finished configuring the device, commit the configuration.

For more information on TCP-RST configuration, see the JUNOS Software CLI Reference.

Related Topics

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]