Configuring
an IKE Policy—Quick Configuration (Dynamic VPNs)
You can use J-Web Quick Configuration to quickly
configure an IKE policy. (For information about configuring an IKE policy using the CLI editor or the standard J-Web configuration
pages (not Quick Configuration pages), see Configuring an IKE Policy (Standard and Dynamic VPNs).)
To modify an existing policy, click the appropriate link
in the Name column to go to the policy’s
configuration page. Or, select the policy from among those listed
and click one of the following buttons:
Table 116: IKE Policy, Authentication, and Proposal Options
Field
Function
Action
IKE Policy
Name
Name to identify the policy.
Enter a name.
Description
Description of the policy.
Enter a brief description of the policy.
Mode
Specifies how participants should exchange encryption and authentication
information during Phase 1 tunnel negotiations. The dynamic VPN feature
only uses aggressive mode, which transfers the information between
participants in two exchanges.
No action is required. The device displays this information
for informational purposes only.
Pre-shared
Key
Pre-shared key
Use one of the following preshared key types:
ASCII text
Hexadecimal
Click Pre shared key, click the type of
key, and enter the key in the appropriate format.
Proposal
None
Do not use proposals
Click None.
User Defined
Use up to four Phase 1 proposals that you previously defined.
If you include multiple Phase 1 proposals in the IKE policy, use the
same Diffie-Hellman group in all of the proposals.
Click User Defined, select a proposal (or
proposals) from the pop-up menu, and click Add.
