Interface and Routing Features on SRX 650 Services Gateways

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

The following tables list interface and routing features that are supported on SRX 650 services gateways.

Table 10: Interfaces

Feature	More Information
Ethernet interface	Ethernet Interface Overview
Fast Ethernet interface	Interfaces Terms
Frame Relay interface	Frame Relay
Generic routing encapsulation (GRE) interface	Special Interfaces
Gigabit Ethernet interface	Interfaces Terms
High-Level Data Link Control (HDLC) interface	High-Level Data Link Control
Internally generated GRE interface	Special Interfaces
Internally generated link services interface	Special Interfaces
Internally generated IP-over-IP interface	Special Interfaces
Internally generated Protocol Independent Multicast (PIM) encapsulation interface	Special Interfaces
IP-over-IP encapsulation interface	Special Interfaces
Link services interface	Services Interfaces
Link Fragment Interleaved	Configuring MLPPP over ADSL Interfaces
Loopback interface	Loopback Interface
Passive monitoring interface	Special Interfaces
Point-to-Point Protocol interface	Point-to-Point Protocol
Point-to-Point Protocol over Ethernet (PPPoE) interface	Configuring Point-to-Point Protocol over Ethernet

Table 11: Routing Options

Feature	More Information
IPv4 options and broadcast Internet diagrams	Routing Overview
IPv6 routing, forwarding, global address configuration, and Internet Control Message Protocol (ICMP)	Routing Overview
Static routing	Static Routing Overview
RIPv1, RIPv2	RIP Overview
RIP next generation (RIPng)	RIPng Overview
OSPFv2	OSPF Overview
OSPFv3	OSPF Overview
IS-IS	IS-IS Overview
BGP	BGP Overview
BGP extensions for IPv6	BGP Overview
Neighbor Discovery Protocol (NDP) and Secure Neighbor Discovery Protocol (SNDP)	JUNOS Routing Protocols Configuration Guide
Multiple virtual routers	JUNOS Routing Protocols Configuration Guide
Network Time Protocol (NTP)	JUNOS System Basics and Services Command Reference
Virtual Router Redundancy Protocol (VRRP)	JUNOS Software Network Interfaces Configuration Guide

Table 12: MPLS

Feature	More Information
Secondary and standby label-switched paths (LSPs)	MPLS Overview
Point-to-multipoint connections	MPLS Overview
MPLS virtual private networks (VPNs) with VPN routing and forwarding (VRF) tables on customer edge (CE) routers	VPN Overview
Layer 3 MPLS VPNs	VPN Overview
Layer 2 VPNs for Ethernet connections	VPN Overview
Circuit cross-connect (CCC) and translational cross-connect (TCC)	VPN Configuration Overview
Label Distribution Protocol (LDP)	Signaling Protocols Overview
RSVP	Signaling Protocols Overview
Connectionless Network Service (CLNS)	CLNS Overview
OSPF and IS-IS traffic engineering extensions	JUNOS Software MPLS Applications Configuration Guide
Equal-cost multipath (ECMP)	JUNOS Software MPLS Applications Configuration Guide
Interprovider and carrier-of-carriers VPNs	JUNOS Software VPNs Configuration Guide
Virtual private LAN service (VPLS)	VPLS Overview

Table 13: Stateless Firewall Filters

Feature	More Information
Stateless firewall filters or access control lists (ACLs)	Stateless Firewall Filter Overview

Table 14: CoS

Feature	More Information
Code-point aliases	Code-Point Aliases
Classifiers	Classifiers
Forwarding classes	Forwarding Classes
Transmission queues	Transmission Queues
Schedulers: Transmission rate Delay buffer size Shaping rate Red drop profile	Schedulers
Virtual channels	Virtual Channels
Tunnels	CoS Queuing for Tunnels
Policing	Policers for Traffic Classes

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]