 |
Note: Two different RJ-45 cables and RJ-45 to DB-9 adapters are provided. Do not use the RJ-45 cable and adapter for the Services Router console port to connect to the TGM550 console port. |
The Avaya VoIP modules supported on the Services Router accept different kinds of network cables.
The console port on a TGM550 Telephony Gateway Module has an RJ-45 connector. Table 59 provides TGM550 RJ-45 console connector pinout information. An RJ-45 cable is supplied with the TGM550.
|
Note: Two different RJ-45 cables and RJ-45 to DB-9 adapters are provided. Do not use the RJ-45 cable and adapter for the Services Router console port to connect to the TGM550 console port. |
To connect the console port to an external management device, you need an RJ-45 to DB-9 serial port adapter, which is also supplied with the TGM550.
Table 59: TGM550 RJ-45 Console Connector Pinouts
TGM550 RJ-45 Pin |
Signal |
Terminal DB-9 Pins |
|---|---|---|
1 |
For future use |
NC |
2 |
TXD (TGM550 input) |
3 |
3 |
RXD (TGM550 output) |
2 |
4 |
CD |
4 |
5 |
GND |
5 |
6 |
DTR |
1 |
7 |
RTS |
8 |
8 |
CTS |
7 |
The two analog telephone ports and two analog trunk ports on the TGM550 use an RJ-11 cable. Table 60 describes the TGM550 RJ-11 connector pinout.
Table 60: TGM550 RJ-11 Connector Pinout
Pin |
Signal |
|---|---|
1 |
No connection |
2 |
No connection |
3 |
Ring |
4 |
Tip |
5 |
No connection |
6 |
No connection |
The TIM508 Analog Telephony Interface Module uses a B25A unshielded 25–pair Amphenol cable. Table 61 describes the TIM508 connector pinout.
Table 61: TIM508 Connector Pinout
Pin |
Signal |
|---|---|
1 |
Tip |
2 |
Tip |
3 |
Tip |
4 |
Tip |
5 |
Tip |
6 |
Tip |
7 |
Tip |
8 |
Tip |
26 |
R - Receive |
27 |
Ring |
28 |
Ring |
29 |
Ring |
30 |
Ring |
31 |
Ring |
32 |
Ring |
33 |
Ring |
The TIM510 Telephony Interface Module uses an RJ-45 cable. Table 62 describes the TIM510 RJ-45 connector pinout.
Table 62: TIM510 RJ-45 Connector Pinout
Pin |
Signal |
|---|---|
1 |
Ring |
2 |
Tip |
3 |
No connection |
4 |
R1 - Transmit |
5 |
T1 - Transmit |
6 |
No connection |
7 |
No connection |
8 |
No connection |
The TIM514 Telephony Interface Module uses an RJ-11 cable. Table 63 describes the TIM514 RJ-11 connector pinout information.
Table 63: TIM514 RJ-11 Connector Pinout
Pin |
Signal |
|---|---|
1 |
No connection |
2 |
No connection |
3 |
Ring |
4 |
Tip |
5 |
No connection |
6 |
No connection |
The TIM516 Analog Telephony Interface Module uses a B25A unshielded 25–pair Amphenol cable. Table 64 describes the TIM516 connector pinout.
Table 64: TIM516 Connector Pinout
The TIM518 Analog Telephony Interface Module uses a B25A unshielded 25–pair Amphenol cable. Table 65 describes the TIM518 connector pinout.
Table 65: TIM518 Connector Pinout
