[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

show security nat static-nat summary

Syntax


            
                        show security nat static-nat summary       
               
               <node (           node-id          | all | local
                  | primary)>

Release Information

Command introduced in Release 8.5 of JUNOS software; node options added in Release 9.0 of JUNOS software.

Description

Display static Network Address Translation (NAT) summary information.

This command is supported on J-series devices.

Options

none—Display static NAT summary information.

node—(Optional) For chassis cluster configurations, display static NAT summary information on specific node.

node-id —Identification number of the node. It can be 0 or 1.
all—Display information about all nodes.
local—Display information about the local node.
primary—Display information about the primary node.

Required Privilege Level

view

List of Sample Output

show security nat static-nat summary

Output Fields

Table 95 lists the output fields for the show security nat static-nat summary command. Output fields are listed in the approximate order in which they appear.

Table 95: show security nat static-nat summary Output Fields

Field Name	Field Description
Total static NAT mappings	Number of static NAT entries in the table.
Maximum	Maximum number of static NAT entries possible.
Ingress Interface	Name of the interface on which static NAT is defined.
Destination	Destination IP address and subnet mask.
Host	Host IP address and subnet mask mapped to the destination IP address and subnet mask.
Virtual Router	Name of the virtual device that performs route lookup for the host IP address and subnet mask.

Sample Output

show security nat static-nat summary

user@host> show
               security nat static-nat summary

  Total static NAT mappings: 3, Maximum: 300
  Ingress Interface    Destination    Host         Virtual Router
  ge-0/0/0.0           1.1.1.1/32     10.1.1.1/32  trust-vr
  ge-0/0/0.0           1.1.3.0/24     10.1.3.0/24  trust-vr
  ge-0/0/0.1           2.2.2.1/32     20.1.1.1/32  trust-vr

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]