[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

show security nat incoming-table

Syntax

show security nat incoming-table
<node ( node-id | all | local | primary)>

Release Information

Command introduced in Release 8.5 of JUNOS software; node options added in Release 9.0 of JUNOS software.

Description

Display Network Address Translation (NAT) table information.

This command is supported on J-series devices.

Options

none—Display all information NAT incoming table.

node—(Optional) For chassis cluster configurations, display incoming table information on a specific node.

Required Privilege Level

view

Related Topics

clear security nat incoming-table

List of Sample Output

show security nat incoming-table

Output Fields

Table 87 lists the output fields for the show security nat incoming-table command. Output fields are listed in the approximate order in which they appear.

Table 87: show security nat incoming-table Output Fields

Field Name

Field Description

In use

Number of entries in the NAT table.

Maximum

Maximum number of entries possible in the NAT table.

Entry allocation failed

Number of entries failed for allocation.

Destination

Destination IP address and port number.

Host

Host IP address and port number that the destination IP address is mapped.

References

Number of sessions referencing the entry.

Timeout

Timeout, in seconds, of the entry in the NAT table.

Source-pool

Name of source pool where translation is allocated.

Sample Output

show security nat incoming-table

user@host> show security nat incoming-table 
In use: 1, Maximum: 1024, Entry allocation failed: 0
Destination           Host                  References Timeout Source-pool
10.1.1.26:1028        1.1.1.10:5060                  1    3600 p1
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]