[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

show security alg sip rate

Syntax

show security alg sip rate
<node ( node-id | all | local | primary)>

Release Information

Command modified in Release 9.2 of JUNOS software; node options added in Release 9.0 of JUNOS software.

Description

Display rate information for Session Initiation Protocol (SIP) Application Layer Protocol (ALG) messages.

This command is supported on J-series and SRX-series devices.

Options

none—Display all SIP ALG rate information.

node—(Optional) For chassis cluster configurations, display SIP rate on a specific node (device) in the cluster.

Required Privilege Level

view

Related Topics

sip

List of Sample Output

show security alg sip rate

Output Fields

Table 39 lists the output fields for the show security alg sip rate command. Output fields are listed in the approximate order in which they appear.

Table 39: show security alg sip rate Output Fields

Field Name

Field Description

CPU ticks

SIP ALG CPU ticks per microsecond.

Time taken

Time, in microseconds, that the last SIP ALG message needed to transit the network.

Total time

Total time, in microseconds, during an interval of less than 10 minutes for the specified number of SIP ALG messages to transit the network.

Rate

Number of SIP ALG messages per second transiting the network.

Sample Output

show security alg sip rate

user@host> show security alg sip rate 
CPU ticks per us is 166
Time taken for the last message is 1103 us
Total time taken for 3124 messages is 6221482 us (in less than 10 minutes)
Rate: 502 messages/second
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]