request modem wireless activate manual

Syntax

Release Information

Command introduced in Release 9.5 of JUNOS software.

Description

For CDMA EV-DO 3G wireless modem interfaces, enable modem card to connect to service provider’s cellular network.

This command is supported on SRX 210 devices.

Options

interface-name—The 3G wireless modem interface on the SRX 210 device is cl-0/0/8.

msl msl-number—Master subsidy lock (MSL) number required to unlock the modem card. Obtain the number from the service provider.

mdn mdn-number—Mobile directory number (MDN) 10–digit phone number. Obtain the number from the service provider.

imsi imsi-number—International mobile station identity (IMSI) subscriber identification number. Obtain the number from the service provider.

sid sid-number—System identification (SID) number. Use the show modem wireless interface network command to display the SID.

nid nid-number—Network identification (NID) number. Use the show modem wireless interface network command to display the NID.

sip-user-id sip-id—Simple IP user identification. Obtain the username from the service provider.

sip-password sip-password—Simple IP password. Obtain the password from the service provider.

Required Privilege Level

maintenance

Related Topics

show modem wireless interface network

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

Checking status... 
 Modem current activation status: Not Activated
Starting activation...
 Performing account activation step 1/6 : [Unlock] Done
 Performing account activation step 2/6 : [Set MDN] Done
 Performing account activation step 3/6 : [Set SIP Info] Done
 Performing account activation step 4/6 : [Set IMSI] Done
 Performing account activation step 5/6 : [Set SID/NID] Done
 Performing account activation step 6/6 : [Commit/Lock] Done
Configuration Commit Result: PASS
Resetting the modem ... Done
Account activation in progress. It can take up to 5 minutes
Please check the trace logs for details.