[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

show poe interface

Syntax

show poe interface <ge-fpc/pic/port>

Release Information

Command introduced in JUNOS Release 9.5 for the SRX 240 services gateways.

Description

Displays the status of Power over Ethernet (PoE) ports.

Options

none—Displays the status of all PoE ports on the services gateway.

ge-fpc/pic/port— (Optional) Displays the status of a specific PoE port on the services gateway.

Required Privilege Level

View

Output Fields

Table 27 lists the output fields for the show poe interface command. Output fields are listed in the approximate order in which they appear.

Table 27: show poe interface Output Fields

Field name

Field Description

PoE Interface

Specifies the interface name.

Admin Status

Specifies whether PoE capabilities are enabled or disabled.

Oper status

Specifies the operational status of the port.

Max-power

Specifies the maximum power configured on the port.

Priority

Specifies whether the port is high priority or low priority.

Power-consumption

Specifies how much power is being used by the port.

Class

Indicates the class of the powered device as defined by the IEEE 802 AF standard.

show poe interface

user@host>show poe interface

Interface Admin status Oper status Max power Priority Power consumption Class
 			ge-0/0/0 Enabled      Searching   15.4W     Low      0.0W                0
 			ge-0/0/1 Enabled      Powered-up  15.4W     High     6.6W                0
 			ge-0/0/2 Disabled     Disabled    15.4W     Low      0.0W                0
 			ge-0/0/3 Disabled     Disabled    15.4W     Low      0.0W                0

user@host>show poe interface ge-0/0/1

PoE interface status	:
PoE interface                :  ge-0/0/1
Administrative status        : Enabled
Operational status           : Powered-up
Power limit on the interface : 15.4 W
Priority                     : High
Power consumed               : 6.6 W
Class of power device        :   0
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]