[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
show poe controller
Syntax
Release Information
Command introduced in JUNOS Release 9.5
for the SRX 240 services gateways.
Description
Displays the status of the Power over Ethernet
(PoE) controller.
Options
none—Displays general parameters
of the PoE software module controller.
Required Privilege Level
View
Output Fields
Table 26 lists the output fields for the show poe controller command.
Output fields are listed in the approximate order in which they appear.
Table 26: show poe controller Output
Fields
Field name
|
Field Description
|
Controller-index
|
Identifies the controller.
|
Maximum-power
|
Specifies the maximum power that can be provided by the
services gateway to PoE ports.
|
Power-consumption
|
Specifies the total amount of power allocated to the
PoE ports.
|
Guard-band
|
Shows the guard band configured on the controller.
|
Management
|
Shows the power management mode.
|
show poe controller
user@host>show poe controller
Controller Maximum Power Guard band Management
index power consumption
0 150.0 W 0.0 W 0 W Static
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
