Chassis View

The Chassis View feature in the J-Web interface allows you to view the images of the services gateways and access the information related to each gateway. The Chassis View appears on the Dashboard page by default when you log in to the J-Web interface.

Note: The Chassis View option can be enabled or disabled in the Dashboard Preference dialog box. To access the Dashboard Preference dialog box, click the icon on the upper-right corner of the Dashboard page and select Chassis View from the Dashboard Preference dialog box. You can also enable Chassis View by clearing the Internet Explorer cookies.

Chassis View allows the dynamic display of line cards, link states, errors, individual PICs, FPCs, fans, power supplies, and so on. Chassis View also helps you view the current status of the services gateway.

The following figure displays the Chassis View page.

The Chassis Viewer image has a refresh time of 1 minute by default. You can change the refreshing time from the Dashboard Preferences dialog box.

Alarms and events are displayed as LEDs on the lower-left corner of the Chassis View. Red represents the presence of active alarms, and green represents the absence of alarms. A major alarm appears in red, below the Reset button, as shown in Figure 6.

You can zoom the Chassis View to the required size by using the zoom bar. You can reset the Chassis View to its original position and size by clicking the Reset button. To view the port options of the interface, right-click the respective port. The following table shows a summary of the options available and the corresponding functions

The Chassis View display will be updated automatically, and you do not need to reload the page to see the latest device status.

Note: To use the Chassis View, a recent version of Adobe Flash that supports ActionScript and AJAX (Version 9) must be installed.