J-Web Configuration

1. Basic chassis cluster

   See step 1 in CLI Configuration.

2. Management interface

   See step 2 in CLI Configuration.

3. Fabric interface

   See step 3 in CLI Configuration.

4. Redundancy groups
   • Select Configuration > Quick Configuration > Chassis Cluster.
   • Enter the following, then click Apply:
     • Redundant ether-Interface Count: 2
     • Heartbeat Interval: 1000
     • Heartbeat Threshold: 3
     • Nodes: 0
     • Group Number: 0
     • Priorities: 100
   • Enter the following, then click Apply:
     • Nodes: 0
     • Group Number: 1
     • Priorities: 1
   • Enter the following, then click Apply:
     • Nodes: 1
     • Group Number: 0
     • Priorities: 100
   • Enter the following, then click Apply:
     • Nodes: 1
     • Group Number: 1
     • Priorities: 1
     • Preempt: Select checkbox.
     • Interface Monitor—Interface: fe-1/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: fe-5/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-0/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-4/0/0
     • Interface Monitor—Weight: 255
   • (Optional) Redundancy group 0 (to monitor physical interfaces if data processing and control plane functions are in same node)
     • Interface Monitor—Interface: fe-1/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: fe-5/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-0/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-4/0/0
     • Interface Monitor—Weight: 255
5. Redundant Ethernet interfaces
   • Select Configuration > Quick Configuration > Interfaces.
   • Select ge-0/0/0.
   • Enter the following:
     • Redundant Parent: reth1
   • Click Apply.
   • Select ge-4/0/0.
   • Enter the following:
     • Redundant Parent: reth1
   • Click Apply.
   • Select fe-1/0/0.
   • Enter the following:
     • Redundant Parent: reth0
   • Click Apply.
   • Select fe-5/0/0.
   • Enter the following:
     • Redundant Parent: reth0
   • Click Apply.
   • For last four configuration settings of step 5, see step 5 in CLI Configuration.
6. Security zone
   • See step 6 in CLI Configuration.
7. Access
   • See step 7 in CLI Configuration.