Verify that a PPPoE session is running properly on the logical
interface.
Action
From the CLI, enter the show pppoe interfaces command.
Sample Output
user@host> show pppoe interfaces
pp0.0 Index 67
State: Session up, Session ID: 31,
Service name: video@isp1.com, Configured AC name: isp1.com,
Session AC name: belur, AC MAC address: 00:90:1a:40:f6:4e,
Auto-reconnect timeout: 1 seconds,
Underlying interface: ge-0/0/1.0 Index 69
Meaning
The output shows information about the PPPoE sessions. Verify
the following information:
The PPPoE session is running on the correct logical interface.
Under State, the session is active (up).
Under Underlying interface, the physical interface
on which the PPPoE session is running is correct:
For an Ethernet connection, the underlying interface is
Fast Ethernet or Gigabit Ethernet—for example, ge-0/0/1.0.
For an ATM-over-ADSL or ATM-over-SHDSL connection, the
underlying interface is ATM—for example, at-2/0/0.0.
Related Topics
For a complete description of show pppoe interfaces output, see the JUNOS Interfaces Command Reference.
