| Configuring
3G Wireless Interfaces |
|
Description
|
(Optional) Adds supplemental information about the 3G wireless
physical interface on the device.
|
Type a text description of the physical 3G wireless interface
in the box to clearly identify the interface when viewing displays.
|
|
Modem Options: Init String
|
(Optional) Specifies modem operation.
|
Type a string that begins with AT and includes Hayes
modem commands.
|
| Dialer
Pool Options | |
|
Dialer Pools
|
Displays the list of configured dialer pools on the device.
|
- To add a dialer pool to the interface, click Add.
- To edit a dialer pool, select the name from the list.
You can change the priority, but not the name.
- To delete a dialer pool, select the check box and click Delete.
|
|
Dialer Pool Name (required)
|
Specifies the group of physical interfaces to be used by the
dialer interface.
|
Type the dialer pool name—for example, 1.
|
|
Priority
|
Specifies the priority of this interface within the dialer pool.
Interfaces with a higher priority are the first to interact with the
dialer interface.
|
- Type a priority value from 0 (lowest)
to 255 (highest). The default is 0.
- Click OK to return to the
Quick Configuration Interfaces page.
|
| Card
Activation Options |
|
Card Activation
|
Enables the CDMA wireless modem card to connect to the service
provider’s cellular network.
|
- Select the type of card activation:
- IOTA—Internet-based over the air provisioning.
- Manual Activation—Requires manual entry of the required
information.
- OTASP—Over the air service provisioning.
- Click Activate.
- If you selected Manual Activation or OTASP, you
are prompted to enter information required for card activation. (No
additional information is needed for IOTA card activation.)
- Click OK.
|
| OTASP
Activation Parameters |
|
Dial String
|
Number that the modem uses to contact the service provider’s
network.
|
Enter the dial number supplied by the service provider.
|
| Manual
Activation Parameters |
|
International Mobile Station Identity
|
Mobile subscriber information
|
Enter the number supplied by the service provider.
|
|
Mobile Directory Number
|
10-digit user phone number
|
Enter the number supplied by the service provider.
|
|
Master Subsidy Lock
|
Activation code
|
Enter the code supplied by the service provider.
|
|
Network identification
|
Number between 0 and 65535
|
Enter the NID number displayed with the CLI show modem wireless
interface cl-0/0/8 network command.
|
|
System identification
|
Number between 0 and 32767
|
Enter the SID number displayed with the CLI show modem wireless
interface cl-0/0/8 network command.
|
|
Simple IP password
|
User name
|
Enter the user name supplied by the service provider.
|
|
Simple IP user ID
|
Password
|
Enter the password supplied by the service provider.
|
