show security flow session source-prefix
Syntax
Release Information
Command introduced in Release 8.5 of JUNOS Software; node options added in Release 9.0 of JUNOS Software.
Description
Display information about each session that uses the specified source prefix.
Options
source-prefix-number —Source IPv4 prefix or address about which to display sessions information.
node—(Optional) For chassis cluster configurations, display sessions for the specified source prefix on a specific node.
- node-id —Identification number of the node. It can be 0 or 1.
- all—Display information about all nodes.
- local—Display information about the local node.
- primary—Display information about the primary node.
Required Privilege Level
view
Related Topics
clear security flow session source-prefix
List of Sample Output
show security flow session source-prefix 10/8Output Fields
Table 63 lists the output fields for the show security flow session source-prefix command. Output fields are listed in the approximate order in which they appear.
Table 63: show security flow session source-prefix Output Fields
Field Name | Field Description |
|---|---|
Session ID | Number that identifies the session. You can use this ID to get additional information about the session. |
Policy name | Policy that permitted the traffic. |
Timeout | Idle timeout after which the session expires. |
In | Incoming flow (source and destination IP addresses, application protocol, and interface). |
Out | Reverse flow (source and destination IP addresses, application protocol, and interface). |
Sample Output
show security flow session source-prefix 10/8
user@host> show
security flow session source-prefix 10/8Session ID: 36, Policy name: foo/4, Timeout: 1547 In: 10.10.10.1/4923 --> 3.3.3.2/23;tcp, If: t1-1/0/0.0 Out: 3.3.3.2/23 --> 10.10.10.1/4923;tcp, If: .local..0 1 sessions displayed
