show interfaces flow-statistics
Syntax
Release Information
Command introduced in Release 8.5 of JUNOS Software.
Description
Display interfaces flow statistics.
Options
Interface-name —(Optional) Display flow statistics about the specified interface. Following is a list of typical interface names. Replace pim with the PIM slot and port with the port number. For a complete list, see the JUNOS Software Interfaces and Routing Configuration Guide.
- at-pim/0/port—ATM-over-ADSL or ATM-over-SHDSL interface.
- br-pim/0/port—Basic Rate Interface for establishing ISDN connections.
- ce1-pim/0/port—Channelized E1 interface.
- ct1-pim/0/port—Channelized T1 interface.
- dl0—Dialer Interface for initiating ISDN and USB modem connections.
- e1-pim/0/port—E1 interface.
- e3-pim/0/port—E3 interface.
- fe-pim/0/ port—Fast Ethernet interface.
- ge-pim/0/port—Gigabit Ethernet interface.
- se-pim/0/port—Serial interface.
- t1-pim/0/port—T1 (also called DS1) interface.
- t3-pim/0/ port—T3 (also called DS3) interface.
- wx-slot/0/0—WAN acceleration interface, for the WXC Integrated Services Module (ISM 200).
Required Privilege Level
view
List of Sample Output
show interfaces flow-statistics (Gigabit Ethernet)Output Fields
Table 24 lists the output fields for the show interfaces flow-statistics command. Output fields are listed in the approximate order in which they appear.
Table 24: show interfaces flow-statistics Output Fields
Field Name | Field Description |
|---|---|
Traffic statistics | Number of packets and bytes transmitted and received on the physical interface. |
Local statistics | Number of packets and bytes transmitted and received on the physical interface. |
Transit statistics | Number of packets and bytes transiting the physical interface. |
Flow input statistics | Statistics on packets received by flow module. |
Flow output statistics | Statistics on packets sent by flow module. |
Flow error statistics | Statistics on errors in the flow module. |
Sample Output
show interfaces flow-statistics (Gigabit Ethernet)
user@host> show
interfaces flow-statistics ge-0/0/1.0 Logical interface ge-0/0/1.0 (Index 70) (SNMP ifIndex 49)
Flags: SNMP-Traps Encapsulation: ENET2
Input packets : 5161
Output packets: 83
Security: Zone: zone2
Allowed host-inbound traffic : bootp bfd bgp dns dvmrp igmp ldp msdp nhrp ospf pgm
pim rip router-discovery rsvp sap vrrp dhcp finger ftp tftp ident-reset http https ike
netconf ping rlogin rpm rsh snmp snmp-trap ssh telnet traceroute xnm-clear-text xnm-ssl
lsping
Flow Statistics :
Flow Input statistics :
Self packets : 0
ICMP packets : 0
VPN packets : 2564
Bytes permitted by policy : 3478
Connections established : 1
Flow Output statistics:
Multicast packets : 0
Bytes permitted by policy : 16994
Flow error statistics (Packets dropped due to):
Address spoofing: 0
Authentication failed: 0
Incoming NAT errors: 0
Invalid zone received packet: 0
Multiple user authentications: 0
Multiple incoming NAT: 0
No parent for a gate: 0
No one interested in self packets: 0
No minor session: 0
No more sessions: 0
No NAT gate: 0
No route present: 0
No SA for incoming SPI: 0
No tunnel found: 0
No session for a gate: 0
No zone or NULL zone binding 0
Policy denied: 0
Security association not active: 0
TCP sequence number out of window: 0
Syn-attack protection: 0
User authentication errors: 0
Protocol inet, MTU: 1500
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 2.2.2/24, Local: 2.2.2.2, Broadcast: 2.2.2.255